Sliding table saw T70

Motor power 5.5 kW

Standard voltage supply: 3 ~ / 400 V - 50 Hz

Standard voltage supply: 3 ~ / 400 V - 50 Hz

This drive enables you regulate the speed infinitely variably between 2,000 – 6,000 rpm. As a result of the optimum adjustment of the rotational speed to the material, both the cutting quality and service life of the saw blades are increased – which in turn reduces your costs. Furthermore, even a slight reduction in the rotational speed sometimes decreases the noise level significantly - something which makes the working environment considerably more pleasant. Only available for 3 ~ / 400 volts - 50 Hz and 3 ~ / 440 - 480 volts - 60 Hz. Connection to other voltage supplies possible with the optional transformer.

Standard voltage supply 3 ~ / 400 volts - 50 Hz

Version of the machine for special voltage 3~ / 230 volts - 50 Hz

Version of the machine for special voltage 3~ / 210 - 240 V - 60 Hz

Special voltage: 3 ~ / 440 - 480 volts - 60 Hz

The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. The table length corresponds to the cutting length.

The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. Standard cutting length 3.0 m, the table length corresponds to the cutting length.

The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. The table length corresponds to the cutting length.

The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. The table length corresponds to the cutting length.

The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. The table length corresponds to the cutting length, the scope of supply includes 2 support feet. Please note: Format cut with support arm max. 3.7 m, if required, work with roller support.

The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. Please state your required length! The table length corresponds to the cutting length, the scope of supply includes 2 support feet. Please note: Format cut with support arm max. 3.7 m, if required, work with roller support.

VacuSlide is an efficient and intelligent workpiece clamping system for panel workpieces made of wood, plastic or non-ferrous metals. The system provides excellent performance, especially in the case of thin and/or delicate materials or angle and mitre cuts. Workpieces with a minimum width of 110 mm are securely clamped. The vacuum fields do not have to be preselected. VacuSlide is activated or deactivated via radio remote control. Delivery cpl. with vacuum generator, remote control, backwash system and a safety low pressure warning device. Supplied with 6 suction zones in two rows. VacuSlide cannot be combined with the motorised sliding table or when the rip fence is adjusted via hand wheel.

VacuSlide is an efficient and intelligent workpiece clamping system for panel workpieces made of wood, plastic or non-ferrous metals. The system provides excellent performance, especially in the case of thin and/or delicate materials or angle and mitre cuts. Workpieces with a minimum width of 110 mm are securely clamped. The vacuum fields do not have to be preselected. VacuSlide is activated or deactivated via radio remote control. Delivery cpl. with vacuum generator, remote control, backwash system and a safety low pressure warning device. Supplied with 7 suction zones in two rows. VacuSlide cannot be combined with the motorised sliding table or when the rip fence is adjusted via hand wheel.

VacuSlide is an efficient and intelligent workpiece clamping system for panel workpieces made of wood, plastic or non-ferrous metals. The system provides excellent performance, especially in the case of thin and/or delicate materials or angle and mitre cuts. Workpieces with a minimum width of 110 mm are securely clamped. The vacuum fields do not have to be preselected. VacuSlide is activated or deactivated via radio remote control. Delivery cpl. with vacuum generator, remote control, backwash system and a safety low pressure warning device. Supplied with 8 suction zones in two rows. VacuSlide cannot be combined with the motorised sliding table or when the rip fence is adjusted via hand wheel.

The motorised sliding table impresses as a result of its even feed, which ensures perfect cutting results and reduces complicated rework on the workpiece. Thick solid wood, plywood or chipboard and special materials such as plastics or non-ferrous metal plates can also be safely sawn with ease thanks to this powerful aid. Extension of the system with the pneumatic pressure bar or the VacuSlide vacuum clamping device is ideal here. The feed speed can be infinitely variably pre-selected from 1-25 m/min. The control unit is attached to the side of the sliding table, which means that there is no loss of cutting length. The scope of supply includes a second clamp shoe. Not available for 1.9 m sliding table length!

Standard cutting width 850 mm

Optional cutting width 1,100 mm

The rip fence is completely integrated in the controller. This allows precise cuts in any situation.

The heavy, machined version of the rip fence profile with a special length of 2.0 m is supplied instead of the 1,200 mm standard jaw.

Heavy machined rip fence profile in a special length of 2.0 m. Supplied in addition to the 1,200 mm standard fence.

The trimming of veneered or laminated boards is only one area of application of the edging device. This accessory is simply pushed onto the circular saw fence. It can also be used as a substitute for the laser for cutting-to-size after marking out. The jaw length is 1,000 mm.

This option enables comfortable, controlled folding of the rip fence below table level from the operating position. The option is very useful, especially if you repeatedly cut lengthy workpieces. It goes without saying that the fence can also be comfortably lifted from the operating position with automatic approaching of the original width position.

The unit individually sets both the scoring position left/right on the basis of the stored saw blade data fully automatically. You specify the scoring height electronically, the setting is also provided automatically. The adjustment ranges of the two axes are clearly displayed and easy to understand. Any requisite fine adjustment is therefore child's play. It goes without saying that all settings are stored and not lost when switching off the unit / machine. A special feature of our scorer is the pneumatic lifting / lowering of the scoring saw blades. As a result, the unit is activated in seconds and also quickly taken out of service again. This reduces noise and increases safety. If the machine is equipped with this scoring saw unit, you can nevertheless use main saw blades up to Ø 500 mm (T65 and T70; T60A and T60C up to 400 mm) together with inserted scoring saw blades. The scoring saw blades are simply removed, in order to use saw blades with a max. diameter of 550 mm (T65 and T70). Delivery without scoring saw blades.

The unit individually sets both the scoring position left/right and the scoring width on the basis of the stored saw blade data fully automatically. You specify the scoring height electronically, the setting is also provided automatically. The movement ranges of the three axes are clearly displayed and easy to understand. Any requisite fine adjustment is therefore child's play. It goes without saying that all settings are stored and not lost when switching off the unit / machine. A special feature of our scorer is the pneumatic lifting / lowering of the scoring saw blades. As a result, the unit is activated in seconds and also quickly taken out of service again. This reduces noise and increases safety. If the machine is equipped with this scoring saw unit, you can nevertheless use main saw blades up to Ø 500 mm together with inserted scoring saw blades. The scoring saw blades are simply removed, in order to use saw blades with a max. diameter of 550 mm. Delivery with scoring saw blades.

Delivery cpl. with spacer discs. Saw blade Ø 120 mm, borehole Ø 22 mm

The fitting system allows easy adjustment of the scoring width (2.8 to 3.6 mm) on the stationary scoring saw unit Delivery cpl. with 120 mm Ø saw blades

Marks the danger zone of the scorer during operation with a light which increases the level of attention. MARTIN thereby provides you with a considerable increase in safety.

Saw blade Ø 120 mm, borehole Ø 22 mm

Marks the danger zone of the scorer during operation with a light which increases the level of attention. MARTIN thereby provides you with a considerable increase in safety.

This sturdy cross-cut table is light in spite of its size of 1,340 x 650 mm and forms part of the basic equipment of all saws. It can be attached over the complete length of the sliding table. The clamping is comfortably provided with one hand. The roller facilitates the mounting and removal of larger workpieces and prevents damage to the surface and edges. A large angle scale enables precise mitre cuts between 0° and 50° through simple turning of the cross-cut fence. The fixed angle gauge is precisely incorporated in the table in a single work step and facilitates the quick cutting of standard angles (0°/22.5°/30°/45°).  

The mitre cross-cut table from MARTIN has set standards in flexibility for more than 50 years. No matter whether you wish to execute precise mitre cuts with a high accuracy of fit in large boards or process small beads, the mitre cross-cut table always provides perfect support just where you need it. You use a handle to undo the sturdy 0° arresting device and adjust the table in the range of ± 46° according to the LCD display. Owing to the utility model-protected 3-piece swing arm, neither a moving extension arm construction nor a stationary arm above the table have any negative effects. The distance between the cross-cut fence and saw blade which arises in angle adjustments, e.g. when processing thin beads, was often problematic. To change the angle, the operator simply pushes the cross-cut fence against the stop created by the ParaGlider, so that work is always carried out with a minimum distance between the cross-cut fence and saw blade.

The support can be infinitely variably extended up to 750 mm, with a roller to protect the workpiece.

If you work with cutting lengths > 3.7 m, you have to support the cross-cut table directly on the floor with a roller support. The roller support replaces the support arm of the machine. The roller support cannot be combined with the mitre cross-cut table. Several cross-cut tables with roller support can also be combined on one machine for processing large, heavy materials.

The support can be infinitely variably extended up to 750 mm, with a roller to protect the workpiece.

You obtain an additional standard cross-cut table for your machine with this option. A roller support is required for use as a supplementary table and for machines without a tilting arm.

If you work with cutting lengths > 3.7 m, you generally have to support the cross-cut table directly on the floor with a roller support instead of using the support arm. The roller support is also required if an additional cross-cut table is to be used on the machine, e.g. for processing large heavy boards. Several cross-cut tables with roller support can also be combined on one machine for processing large, heavy materials. The roller support cannot be combined with the mitre cross-cut table.  

The dimension display on this cross-cut fence with 2-point alignment is provided in analogue form, i.e. using a scale. In contrast to the version with full-length support, the workpiece rests on two points in this fence. Only in this way can slightly concave first cuts, perhaps caused by stresses in the board, also be precisely cut at an angle. Cutting lengths of 190 - 2020 mm can be set quickly and extremely accurately thanks to the scale, which can be easily read with the magnifier, and the standard fine adjustment for the inner stop element. The quick clamp enables you to change the ball-raced stop element quickly from dimension to dimension and cut lengths up to 3310 mm with the extendable outboard stop. If you prefer to work with digital exact dimensions, the digital cross-cut fence is the right option: The inner and outer stop work with separate measuring devices and can therefore be set independently with an accuracy of a tenth of a millimetre. Each display can be changed over to display relative dimensions, in order to execute incremental cuts quickly, for example.

The dimension display on this cross-cut fence with 2-point alignment is provided digitally, i.e. using electronic displays. In contrast to the version with full-length support, the workpiece rests on two points in this fence. Only in this way can slightly concave first cuts, perhaps caused by stresses in the board, also be precisely cut at an angle. Cutting lengths of 190 - 2020 mm can be set quickly and extremely accurately thanks to the clearly legible digital displays and the standard fine adjustment for the inner stop element. The quick clamp enables you to change the ball-raced stop element quickly from dimension to dimension and cut lengths up to 3310 mm with the extendable outboard stop. The digital cross-cut fence is always the right option: The inner and outer stop work with separate measuring devices and can therefore be set independently with an accuracy of a tenth of a millimetre. Each display can be changed over to display relative dimensions, in order to execute incremental cuts quickly, for example.

The dimension display on this cross-cut fence with full-length support is provided in analogue form, i.e. using a scale. In contrast to the 2-point version, this model has large flip stops and the full length of the workpiece rests on the fence. For example, this is ideal if you work a lot with thin flexible material. The wood to be cut is straightened by the fence and can therefore be cut accurately to size. As in the case of a 2-point alignment, the inner stop element with fine adjustment and scale magnifier can be precisely adjusted. The quick clamp of the stop element supports quick dimension change between 205 and 2020 mm, whereas lengths up to 3310 mm can be set with the extendable outboard stop. If you prefer to work with digital exact dimensions, the digital cross-cut fence is the right option: The inner and outer stop work with separate measuring devices and can therefore be set independently with an accuracy of a tenth of a millimetre. Each display can be changed over to display relative dimensions, in order to execute incremental cuts quickly, for example.

The dimension display on this cross-cut fence with full-length support is provided digitally, i.e. using electronic displays. In contrast to the 2-point version, this model has large flip stops and the full length of the workpiece rests on the fence. For example, this is ideal if you work a lot with thin flexible material. The wood to be cut is straightened by the fence and can therefore be cut accurately to size. In conjunction with the quick clamp of the stop element, the clearly legible digital displays and the standard fine adjustment for the inner stop element support quick dimension change between 205 and 2020 mm, whereas lengths up to 3310 mm can be set with the extendable outboard stop. The digital cross-cut fence is always the right option: The inner and outer stop work with separate measuring devices and can therefore be set independently with an accuracy of a tenth of a millimetre. Each display can be changed over to display relative dimensions, in order to execute incremental cuts quickly, for example.

The controlled cross-cut fence (4th axis) replaces the cross-cut fence, the cutting length is preset in the controller. The cutting length range is 100 - 3,300 mm, the scope of supply includes an extendable support. The cross-cut fence can only be mounted in the rear position (see Figure, which shows a mitre cross-cut table instead).

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for the standard cross-cut fence of the T60A, T60C and T65

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for the standard cross-cut fence of the T60A, T60C and T65

The innovative ”RadioCompens” mitre cut system provides fully automatic length compensation for mitre cuts and double mitre cuts by means of a wireless connection between the mitre cross-cut table, controller and digital display of the cross-cut fence. Thanks to this wireless-supported communication of the cross-cut table, controller and stop elements, time-consuming setup times for mitre cuts are reduced by up to 80 %. You simply set the table to the desired angle and the electronic cutting length displays on the cross-cut fence immediately show you the corrected length dimension. In contrast to other systems in the market, "RadioCompens" compensates for a variety of saw blade thicknesses by itself fully automatically. As a result, you always have a precision cut with an accuracy of a tenth of a millimetre also on the left-hand side of the saw blade - irrespective of the saw blade you are currently using. The system consists of:

digitalem Längenanschlag
• Parallelogrammquertisch mit Funkanbindung "RadioConnect" an die Steuerung
• RadioCompens-Elektronik
• ParaGlider zur einfachen Reduzierung des Abstandes zwischen Längenanschlag und Sägeblatt

The innovative ”RadioCompens” mitre cut system provides fully automatic length compensation for mitre cuts and double mitre cuts by means of a wireless connection between the mitre cross-cut table, controller and digital display of the cross-cut fence. Thanks to this wireless-supported communication of the cross-cut table, controller and stop elements, time-consuming setup times for mitre cuts are reduced by up to 80 %. You simply set the table to the desired angle and the electronic cutting length displays on the cross-cut fence immediately show you the corrected length dimension. In contrast to other systems in the market, "RadioCompens" compensates for a variety of saw blade thicknesses by itself fully automatically. As a result, you always have a precision cut with an accuracy of a tenth of a millimetre also on the left-hand side of the saw blade - irrespective of the saw blade you are currently using. The system consists of:

digitalem Längenanschlag
• Parallelogrammquertisch mit Funkanbindung "RadioConnect" an die Steuerung
• RadioCompens-Elektronik
• ParaGlider zur einfachen Reduzierung des Abstandes zwischen Längenanschlag und Sägeblatt

The ”Control” mitre cut system includes a package which combines the controlled cross-cut fence with the mitre cross-cut table. Apart from the cutting height, angle and width, the cutting length and the table angle are also completely integrated in the controller by this means. You specify the requisite length and width dimensions and the controller positions the saw blade and fences. The length compensation required for angle cuts is completely automated. The mitre cross-cut table is connected to the controller by wireless and supplies the angle data directly to the controller. The length compensation is provided dynamically for cutting lengths up to 3,300 mm. The fence is always mounted in the rear position and its large cutting range of 100 to 3,300 mm allows quick and variable working, since the complete range of two flip stop elements is covered. The respective fence is displayed depending on the length to be cut. If you work with lengthy workpieces, you will particularly appreciate the extendable support which also forms part of the package. The system consists of:

elektronisch gesteuertem Längenanschlag mit durchgehender Anlage
• Parallelogrammtisch mit Funkanbindung "RadioConnect" an die Steuerung
• ausziehbare Auflage 500 mm
• verstärktem Stützarm

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for the standard cross-cut fence of the T60A, T60C and T65

The analogue fence is characterised by a high setting precision thanks to a large angle scale; the mitres can be cut from both sides. Apart from a precise mitre cut, an exact length on the workpiece is also required in most application cases. A length compensation was therefore provided for ten preferred angles (0°, 5°, 10°, 15°, 22,5°, 30°, 45°, 50°, 60° and 67.5°). The fences can be used on alternating sides and permit cutting lengths from 90 – 1,375 mm. An excellent feature of the MitreX is the utility model-protected tear-out prevention block, which guarantees tear-free cuts. It is also just as useful for cutting after marking out. The one-handed clamping means that attachment to the sliding table is simplicity itself. The fence is very stable but nevertheless lightweight and is supplied with a wall bracket.

The digital fence is characterised by a high setting precision thanks to a large angle scale and the additional digital angle display (resolution 0.01°). Mitres can be cut from two sides. Apart from a precise mitre cut, an exact length on the workpiece is also required in most application cases. A length compensation was therefore provided for ten preferred angles (0°, 5°, 10°, 15°, 22,5°, 30°, 45°, 50°, 60° and 67.5°). The fences can be used on alternating sides and permit cutting lengths from 90 – 1,375 mm. An excellent feature of the MitreX is the utility model-protected tear-out prevention block, which guarantees tear-free cuts. It is also just as useful for cutting after marking out. The one-handed clamping means that attachment to the sliding table is simplicity itself. The fence is very stable but nevertheless lightweight and is supplied with a wall bracket.

The extension of the table length is executed as a tool and equipment case. You therefore always have tools and smaller accessories readily available directly by the machine.

The extension of the table length elongates the machine table to the rear by 1,200 mm with a width of 850 mm. It is supplied instead of the tool tray. It is executed in stainless steel on a steel frame.  

The table surface is approx. 600 x 350 mm and foldable. The accessory is not available for a sliding table length of 1.9 m.

The "second support" is very useful for processing large boards and serves as a support when working with the mitre fence. The accessory can be used as a simple parallel cutting aid when combined with the "rip fence for sliding table".

The rip fence is simply attached to the "second support". The accessory permits parallel cuts of up to 800 mm on the sliding table. The "second support" is a prerequisite.

Installation is provided in the sliding table groove at any position of the sliding table. Max. clamp height 150 mm, clamp stroke 10 mm.

Installation is provided in the sliding table groove at any position of the sliding table. The clamp has a pneumatic safety cylinder, the cylinder stroke is 0 - 100 mm.

MARTIN offers an ingenious pressure bar for the sliding table, in order to extend the functional capabilities of your sliding table saw. It is easy to cut thin boards, Resopal laminate or veneer with this. With a stroke height of 100 mm and a contact pressure of 800 N, large workpieces can also be processed safely and precisely. The pressure bar can also be used with a cross-cut fence for exact workpiece positioning. This can be positioned at the end or beginning of the bar and between the pressure elements. Angle cuts are also possible. In this regard, the "interfering" pressure segments are simply switched off and therefore remain in the top position. The pressure bar is provided with a continuous control panel for quick and intuitive operation. This enables operation from any position on the sliding table. The commissioning of the pressure bar is simplicity itself. It is mounted directly on the sliding table at two points, screwed together with this and connected to the compressed air line of the machine – finished. Max. cutting length with cross-cut fence in front or rear position: 1,590 mm, 1 actuated clamping element @ 1,095 mm, max. workpiece length without cross-cut fence: Length of sliding table minus 160 mm.

MARTIN offers an ingenious pressure bar for the sliding table, in order to extend the functional capabilities of your sliding table saw. It is easy to cut thin boards, Resopal laminate or veneer with this. With a stroke height of 100 mm and a contact pressure of 800 N, large workpieces can also be processed safely and precisely. The pressure bar can also be used with a cross-cut fence for exact workpiece positioning. This can be positioned at the end or beginning of the bar and between the pressure elements. The pressure bar is provided with a continuous control panel for quick and intuitive operation. This enables operation from any position on the sliding table. The commissioning of the pressure bar is simplicity itself. It is mounted directly on the sliding table at two points, screwed together with this and connected to the compressed air line of the machine – finished. Max. cutting length with cross-cut fence in front or rear position: 2,690 mm, 2 jointly actuated clamping elements @ 1,095 mm, max. workpiece length without cross-cut fence: Length of sliding table minus 160 mm.

MARTIN offers an ingenious pressure bar for the sliding table, in order to extend the functional capabilities of your sliding table saw. It is easy to cut thin boards, Resopal laminate or veneer with this. With a stroke height of 100 mm and a contact pressure of 800 N, large workpieces can also be processed safely and precisely. The pressure bar can also be used with a cross-cut fence for exact workpiece positioning. This can be positioned at the end or beginning of the bar and between the pressure elements. The pressure bar is provided with a continuous control panel for quick and intuitive operation. This enables operation from any position on the sliding table. The commissioning of the pressure bar is simplicity itself. It is mounted directly on the sliding table at two points, screwed together with this and connected to the compressed air line of the machine – finished. Max. cutting length with cross-cut fence in front or rear position: 2,990 mm, 2 jointly actuated clamping elements @ 1,250 mm, max. workpiece length without cross-cut fence: Length of sliding table minus 160 mm.

MARTIN offers an ingenious pressure bar for the sliding table, in order to extend the functional capabilities of your sliding table saw. It is easy to cut thin boards, Resopal laminate or veneer with this. With a stroke height of 100 mm and a contact pressure of 800 N, large workpieces can also be processed safely and precisely. The pressure bar can also be used with a cross-cut fence for exact workpiece positioning. This can be positioned at the end or beginning of the bar and between the pressure elements. The pressure bar is provided with a continuous control panel for quick and intuitive operation. This enables operation from any position on the sliding table. The commissioning of the pressure bar is simplicity itself. It is mounted directly on the sliding table at two points, screwed together with this and connected to the compressed air line of the machine – finished. Max. cutting length with cross-cut fence in front or rear position: 3,390 mm, 3 actuated clamping elements, 2 of which can be independently disconnected @ 908 mm, max. workpiece length without cross-cut fence: Length of sliding table minus 160 mm.

The clamping and sawing system for sliding table saws is designed for the ergonomic, safe and efficient cutting of workpieces. The new system is an effective guard which can be installed and adjusted in no time without the need for tools. When sawing oblique, short, narrow and wedge-shaped workpieces of different sizes, the health and safety regulations are often disregarded based on the assumption that it is quicker that way. The new guard for sliding table saws puts an end to the excuses as it makes the safe option impressively quick without the need for tools or any significant loss of time. The clamping and sawing system is available in a standard and a comfort version. A storage board for wall mounting which is suitable for both versions ensures that each individual component of this workplace protection device is always in the right place and quickly to hand. The set consists of:

1 Zuführanschlag
• 1 Hilfsanschlag schräg
• 1 Schwenkspanner
• Wandmontageplatte

The clamping and sawing system for sliding table saws is designed for the ergonomic, safe and efficient cutting of workpieces. The new system is an effective guard which can be installed and adjusted in no time without the need for tools. When sawing oblique, short, narrow and wedge-shaped workpieces of different sizes, the health and safety regulations are often disregarded based on the assumption that it is quicker that way. The new guard for sliding table saws puts an end to the excuses as it makes the safe option impressively quick without the need for tools or any significant loss of time. The clamping and sawing system is available in a standard and a comfort version. A storage board for wall mounting which is suitable for both versions ensures that each individual component of this workplace protection device is always in the right place and quickly to hand. The set consists of:

1 Zuführanschlag
• 1 Hilfsanschlag schräg
• 2 Hilfsanschlägen schmal
• 2 Schwenkspannern
• Wandmontageplatte

The laser beam shows you the exact progression of the cut, which is especially useful for trimming and cutting solid wood. Cutting steps to size after marking out is also one of the typical areas of application of this accessory.

The spiral cable enables the switch to be positioned anywhere on the sliding table. The switch can be placed on the right behind the guide beam for storage.

This option is ideal for cutting plastics and non-ferrous metals. The sprayer radially covers the saw blade with special minimum quantity coolant media (not supplied).

Not until you have a mastered machine to perfection can you exploit its maximum potential. Thorough on-site training by a MARTIN factory technician enables you to fully benefit from your machine.

We offer tailored inspection and maintenance services for your MARTIN machines. You thereby maintain the operational readiness and accuracy of your machine over many years.