T27

Spindle moulder T27

Flexibility for today and tomorrow. And for all eternity.

Setting up a spindle moulder can be a major challenge. This is not the case for the T27 FleX with its modern touchscreen controller. The integrated tool calculation enables you to set up complex moulding patterns with the spindle tilted in no time. The large tilting range of 2x 46° can be efficiently used on this basis – and you can follow your inclinations lock, stock and barrel.
Powerful drive
Electrical table rings
Modern Touch-Screen control unit
Motorised positioning of feed support
Modern HSK interface

Experience the T27!

Touchscreen control unit

Each T27 is equipped with a modern, intuitive 5.7″ touchscreen control unit. Self-explanatory coloured icons, comprehensible text messages and the clearly arranged menu structure support even inexperienced operators and ensure first-class work results. The even clearer 10.4″ screen is available as an option.

Fence

The bilaterally guided fence provides the highest precision exactly where it counts. It is set via hand wheel according to a digital display in the control unit in the basic version of the T27. The motorised version is controlled completely electronically. If the fence has to be removed from the machine table, e.g. for moulding on the ring fence, no time-consuming referencing is required after re-configuration owing to the precise and reliable mechanical fittings.

Table rings

The electrical table rings invented by MARTIN in 1999 can be infinitely variably adapted quickly and efficiently to tools with diameters between 70 and 250 mm. You will quickly appreciate this capability, especially in the T27 FleX tilting arbor spindle moulder, because the table opening can also be perfectly adjusted to the tilting tool here.

Feed support

The feed support with electric motor positioning, together with its ingenious latching mechanism, provides genuine workload relief. The height adjustment of the feed unit can be easily specified and approached via controller and can also be integrated in the programs. The setting of the depth of the feed can be very easily adjusted thanks to the ball-raced guide. And if the feed is currently not required, it can be simply swivelled away to one side – without losing the previously made settings.

Composite frame

The machine frame is a sturdy and thick-walled composite structure – a frame construction whose design can only be found with such perfection in MARTIN machines. There are many manufacturers on the market who like to call their frames “composite”. If you examine them more closely, however, you will quickly discover that we at MARTIN are the only manufacturer of standard machines to use steel and concrete in a genuine composite construction. One component is of no use without the other, only the intelligent combination of the materials provides a first-class frame. This frame offers the customer the perfect basis for superior work.
placeholder-img
Controls and Features

Infinitely variable rotational speed control

The infinitely variable rotational speed control for the cutter spindle enables you to tailor the speed of the tool perfectly to the demands of the work step within a range of 1,000 to 12,000 rpm – even during operation. In addition to very slow profile sanding heads, the large speed range means that small high-speed tools such as end mills can be used with an ideal cutting speed without any problems. Motors are available from 7.5 to 11 kW to provide the required power.

Motorised positioning of the fence

Motorised positioning of the fence is an extremely useful addition to the T27, irrespective of whether a spindle moulder or tilting arbor spindle moulder is concerned. You can therefore make the most frequent settings for a spindle cutter, the cutting height and depth, with the complete support of the controller, because the electronics are now responsible for doing what you once did via hand wheel. The fence settings are approached with pinpoint accuracy owing to the extremely high reproducibility of ± 0.025 mm. Even critical settings, e.g. for cutting counter profiles, can be precisely positioned. Like the cutting height in the basic equipment, the cutting depth is therefore also a component of any program, and the controller carries out the positioning in accordance with program specifications.

Motorised positioning of the infeed jaw

Motorised positioning of the infeed jaw presents itself when the purely digital display is no longer sufficient. You obtain complete control over the fence with this option, which is only available in conjunction with electromotive positioning of the fence. You make all settings on the fences from the controller. This option is recommended for users who frequently carry out extensive moulding operations on the workpiece.

HSK quick-change system

The new HSK tool interface is the ideal extension for users who regard their spindle cutter as an effective supplement to their CNC machining centre or wish to change their tools quickly and easily as a unit with the arbor. If the basic T27 machine is equipped with MARTIN’s proven DornFix quick-change system, the pneumatic HSK clamping system can be selected as an option. Using this technology, you can change the tool / arbor unit within a few seconds and achieve enormous savings on the time required for setting-up!
Furthermore, you can use suitable CNC machining centre tools directly on the spindle cutter without any problems, thereby relieving this expensive machine from capacity-consuming traversing moulding jobs.

Integral fence jaws

The fence opening should always be closed as much as possible, so that the workpiece can be safely guided and slide along the fence. Both are provided by the tried-and-tested integral fence. The bars of the jaws consist of hard-coated aluminium and can be easily folded in position, released and also varied in height. The bar cassettes can also be removed effortlessly, allowing you to work with a wooden insert.

AutoLock fence jaw clamping system

Fence jaws are moved on a regular basis for optimum adjustment of the fence opening to the tool. But how often is the clamping forgotten about afterwards and the jaws are damaged? The optional AutoLock fence jaw clamping system ensures secure clamping of the standard and integral fence jaws in a simple and safe manner. The jaws are always securely clamped by spring force. The clamping is only released with the easily accessible levers for adjustment. Completely without an electrical or pneumatic system.

Centrex guard

The Centrex stands out through perfect functionality, an attractive design as well as optimum placement on the fence housing. All the functions can be quickly and easily set with only a few steps and without tools. The special form of the pressure shoes guarantees precise workpiece guidance with high visibility of the work step. Pressure can also be exerted on the workpiece for insert cutting.

Table extensions

The table extensions are executed in cast iron on both sides and connected to the machine table completely without a transition. The stable extendable support provides support at the front. The processing of large components therefore becomes a simple matter.

Swinging support for fence

The more you work with the curved moulding fence, the more you will appreciate the benefits of this accessory. If you have to remove the fence from the machine table, the swinging support is there to help you. Using this support, you simply release the fence from the table, lift it with the hand wheel, and swing it into the parking position. The machine table is free in no time and you can attach the requisite special safety guards without any problems with space.

Sliding table

The sliding table is the ideal partner irrespective of whether you profile larger cross-sections across the grain, cut counter profiles or carry out tenoning and mortising tenoning work. The sturdy table provides a large and safe support and can be turned in both directions by up to 45°, and even up to 65° in the case of the fence. As a result, diagonally cut workpieces, e.g. in special window construction, can also be securely clamped and processed. The sliding table has a large travel of 1,400 mm, in order to be able to extend it for the safe processing of large workpieces. Tools up to 350 mm ø can be safely used on a 40 mm arbor with the supplied mortising guard. If the sliding table is not required, it forms a perfect left-hand table extension, since the table can be lowered to machine table level. The guide beam can be easily moved to the rear and is thereby level with the front of the machine.

Spring collets for cutter arbor

If you also wish to use your router tools, normally end mills, on the spindle cutter, the collet arbor is the ideal option for your spindle cutter. The spring collets are easy to exchange and available for end mill shank diameters of 3-25 mm, so that the arbor can be used flexibly. The fence of the T27 can be also mounted further towards the rear by 125 mm
for easy cutting of dovetail joints. The optional infinitely variable speed adjustment is recommended in conjunction with small tool diameters.

BowmouldMaster

This optional safety and working device enables the quick and safe moulding of curved workpieces, also with the feed unit. The BowmouldMaster can be quickly and easily mounted and adjusted on the machine table without any tools and enables moulding to be carried out in an anti-clockwise and clockwise direction. It is supplied instead of the standard CPS Tapoa 08 guard. You can either work with a ring fence (option) or a curved moulding fence (option).

Fence for insert cutting

This optional retrofittable fence is a useful aid for dangerous insert cutting jobs. It enables you to process such jobs accurately and safely. This accessory can also be mounted on the left-hand extension of the table length, making it possible to position grooves exactly. The start and stop point are determined simply and precisely and with high repetition accuracy. When this option is not needed, the fence can be simply folded under the extension of the table length without any problems. Unfortunately the option cannot be supplied without table extensions.
Configure your individual T27
Model
The consistently user-friendly, modern controller of the T27 allows the many mechanical goodies of this machine to be used in a way which is extremely effective and economically efficient. Moreover, the machine can be tailored very closely to the individual requirements of the company. This makes the T27 spindle moulder from MARTIN the optimum solution for companies in which efficiency, versatility, precision, and reliability are of the utmost concern. The T27 Fix is equipped with a 1-axis touchscreen controller for the moulding height. The screen diagonal is 5.7".
T27 Fix spindle moulder
The consistently user-friendly, modern controller of the T27 allows the many mechanical goodies of this machine to be used in a way which is extremely effective and economically efficient. Moreover, the machine can be tailored very closely to the individual requirements of the company. This makes the T27 spindle moulder from MARTIN the optimum solution for companies in which efficiency, versatility, precision, and reliability are of the utmost concern. The T27 FleX is equipped with a 2-axis touchscreen controller for the moulding height and angle. The screen diagonal is 5.7".
T27 FleX tilting arbor spindle moulder
Drive
Two power stages are specified since this a pole-changing motor.
Motor power 5.0 / 6.0 kW
You obtain a motor rating of 7.5 / 9.5 kW with this option instead of the standard motor rating of 5.0 / 6.0 kW. Two power stages are specified since this a pole-changing motor, as is the standard motor. Standard voltage supply: 3 ~ / 400 V - 50 Hz
Motor power 7.5 / 9.5 kW
This drive enables you regulate the speed infinitely variably between 1,000 – 12,000 rpm. As a result of the optimum adjustment of the speed to the material, both the cutting quality and service life of your tools are increased – which in turn reduces your costs. Furthermore, even a slight reduction in the rotational speed sometimes decreases the noise level significantly - something which makes the working environment considerably more pleasant. Only available for 3 ~ / 400 volts - 50 Hz and 3 ~ / 440 - 480 volts - 60 Hz. Connection to other voltage supplies is possible with the optional transformer.
Infinitely variable rotational speed control 7.5 kW
This drive enables you regulate the speed infinitely variably between 1,000 – 12,000 rpm. As a result of the optimum adjustment of the speed to the material, both the cutting quality and service life of your tools are increased – which in turn reduces your costs. Furthermore, even a slight reduction in the rotational speed sometimes decreases the noise level significantly - something which makes the working environment considerably more pleasant. Only available for 3 ~ / 400 volts - 50 Hz and 3 ~ / 440 - 480 volts - 60 Hz. Connection to other voltage supplies is possible with the optional transformer.
Infinitely variable rotational speed control 9.5 kW
This drive enables you regulate the speed infinitely variably between 1,000 – 12,000 rpm. As a result of the optimum adjustment of the speed to the material, both the cutting quality and service life of your tools are increased – which in turn reduces your costs. Furthermore, even a slight reduction in the rotational speed sometimes decreases the noise level significantly - something which makes the working environment considerably more pleasant. Only available for 3 ~ / 400 volts - 50 Hz and 3 ~ / 440 - 480 volts - 60 Hz. Connection to other voltage supplies is possible with the optional transformer.
Infinitely variable rotational speed control 11 kW
Special voltage
Standard voltage supply 3 ~ / 400 volts - 50 Hz
Voltage supply 400 volts / 50 Hz
Special voltage: 3 ~ / 230 volts - 50 Hz
Special voltage 3 ~ / 230 volts - 50 Hz
Special voltage: 3 ~ / 210 - 240 volts - 60 Hz
Special voltage 3 ~ / 210 - 240 volts - 60 Hz
Special voltage: 3 ~ / 440 - 480 volts - 60 Hz
Special voltage 440 - 480 volts / 60 Hz
Control
The 5.7" (145 mm) touchscreen control unit is standard on the machine and can comfortably administer up to 500 tools. Once the optimum tool position has been found for a specified operation, the settings can also be stored (max. 100 programs) . The respective tool is therefore a part of the program. Depending on the development stage of the machine, up to six axes are clearly displayed and efficiently controlled from there.
5.7" touchscreen control unit
Whereas up to 500 tools can be comfortably administered on machines with a 5.7" control unit, up to 1,000 tools are possible on the larger 10.4" touchscreen. Apart from the comfortable search function, the operator also has the advantage with this electronic system that groups and Favorites can be created in the tool database. This considerably accelerates selection of the requisite tool. Once the optimum tool position has been found for a specified operation, the settings can also be stored. There are 100 programs on the 5.7" touchscreen and up to 1,000 storage locations on the 10.4" control unit. The respective tool is therefore a part of the program. Depending on the development stage of the machine, up to six axes are clearly displayed directly on the HOME page and efficiently controlled from there.
10.4" touchscreen control unit
This module enables the operator to combine up to 200 program settings from individual programs (10 programs per setting). As a result, individually compiled work sequences can be created quickly and easily. This software module is available for all T12 / T27 machines and can also be subsequently installed without any problems.
Software module "Program settings”
This unique innovative software allows operators to enter into a real dialogue with their spindle moulder for the first time. The Moulding Assistant Release 2 now supports the moulding of chamfers with simple rebating cutter heads as well as with chamfering cutter heads in addition to rebates and grooves. This software module is available for all T12 / T27 machines and can also be subsequently installed without any problems.
Software module "Moulding Assistant Release 2“
The scanner provides quick, reliable identification of marked tools, tool / arbor combinations and programs assigned to workpieces. You thereby obtain a considerable increase in process safety and reduce error sources.
Tool and program identification system
Additional controlled axes
Digital display of the infeed jaw position also gives you the option of making this setting very precisely according to a digital display. It replaces setting according to a scale and vernier scale. The key advantage clearly consists in the fact that you can now also store the position of the electronically detected moulding jaw in the programs. You thereby use all the advantages of the controller, only the setting still needs to be made manually via hand wheel. The incremental movement is also easily possible owing to the integration in the controller.
Digital display of the infeed jaw position
Motorised positioning of the infeed jaw presents itself when the purely digital display is no longer sufficient. You obtain complete control over the fence with this option, which is only available in conjunction with electromotive positioning of the fence. You make all settings on the fences from the controller. This option is recommended for users who frequently carry out extensive moulding operations on the workpiece.
Motorised positioning of the infeed jaw (right)
Motorised positioning of the fence is an extremely useful addition to the T27, irrespective of whether a spindle moulder or tilting arbor spindle moulder is concerned. You can therefore make the most frequent settings for a spindle cutter, the cutting height and depth, with the complete support of the controller, because the electronics are now responsible for doing what you once did via hand wheel. The fence settings are approached with pinpoint accuracy owing to the extremely high reproducibility of ± 0.025 mm. Even critical settings, e.g. for cutting counter profiles, can be precisely positioned. Like the cutting height in the basic equipment, the cutting depth is therefore also a component of any program, and the controller carries out the positioning in accordance with program specifications.
Motorised positioning of the fence
The best possible closure of the gap between the tool and table is always the challenge when setting up a spindle moulder. The electrically adjustable ring inserts represent the ideal solution. They can be completely integrated in the controller and make setup considerably easier. The eccentric rings open and close the gap infinitely variably by means of simple preset values. The advantage: You do not have to know which fixed ring you insert in the table at the beginning of setup. Instead, you adjust the gap quickly and easily in a final step. This further improved option now offers space for tools with a diameter up to 250 mm, and the susceptibility to dirt could also be reduced considerably further.
Table opening with motorised positioning for tools from Ø 70 - 250 mm
The feed support with motorised positioning together with its latching mechanism, which has been registered for a patent, provides genuine workload relief. The height adjustment of the feed unit can be easily specified and approached via controller and can also be integrated in the programs. The setting of the depth of the feed can be very easily adjusted thanks to the ball-raced guide. And if the feed is currently not required, it can be simply swivelled away to one side – without losing the previously made settings.
    Vollständige Integration der Vorschubsupporthöhe in Steuerung und Programmspeicher
  • Wiederholgenauigkeit ± 0,5 mm
  • Stellweg 220 mm
Motorised positioning of feed support
Table extension
Can be extended to the front by 860 mm (T12) or 700 mm (T27) Length approx. 1700 mm
Extendable workpiece support
This option provides secure support, especially for larger workpieces, e.g. in the external profiling of window frames or door panels.
Table extension, two-sided, with extendable workpiece support
This option provides secure support, especially for larger workpieces, e.g. in the external profiling of window frames or door panels. This version is suitable for combining with the large sliding table.
Table extension, right-hand only, with extendable workpiece support
This optional retrofittable fence is a useful aid for dangerous insert cutting jobs. It enables you to process such jobs accurately and safely. This accessory can also be mounted on the left-hand extension of the table length, making it possible to position grooves exactly. The start and stop point are determined simply and precisely and with high repetition accuracy. When this option is not needed, the fence can be simply folded under the extension of the table length without any problems. Only available with a right-hand or two-sided extension of the table length.
Fence for insert cutting, infinitely adjustable
Fence accessory
The Centrex stands out through perfect functionality, an attractive design as well as optimum placement on the fence housing. All the functions can be quickly and easily set with only a few steps and without tools. The special form of the pressure shoes guarantees precise workpiece guidance with high visibility of the work step. Pressure can also be exerted on the workpiece for insert cutting.
Centrex guard
The guide bars provide perfect support for the workpiece. They prevent workpieces from falling into the fence opening and can be used in almost any case as a result of their slender construction. The bars of the jaws are made of anodised aluminium and are simply inserted into the T-slots of the fence jaws from above and moved into position. These bars have the dimensions 260 x 3 mm, but are also available with the dimensions 260 x 6 mm and 300 x 6 mm as an option.
Guide bars for standard moulding jaws
The fence opening should always be closed as much as possible, so that the workpiece can be safely guided and slide along the fence. Both are provided by the tried-and-tested integral fence. The bars of the jaws consist of hard-coated aluminium and can be easily folded in position, released and also varied in height. The height of the bar cassettes is adjustable and they are easy to remove to enable working with a wooden insert. We supply the fence with a length of 650 mm on the infeed side and 500 mm on the outfeed side.
Integral fence incl. fill rod
Fence jaws are moved on a regular basis for optimum adjustment of the fence opening to the tool. But how often is the clamping forgotten about afterwards and the jaws are damaged? The optional AutoLock fence jaw clamping system ensures secure clamping of the fence jaws in a simple and safe manner. The jaws are always securely clamped by spring force. The clamping is only released with the easily accessible levers for adjustment. Completely without an electrical or pneumatic system. This accessory provides a considerable increase in safety and maintenance of the value of the spindle moulder. This accessory works with standard and integral jaws.
AutoLock fence jaw clamping system
The advantages of the swinging support for the fence are abundantly clear. To remove the fence from the machine table, it is simply released from the table, raised via hand crank and moved to the parking position. The machine table is free in no time and the requisite special safety guards can be attached without any space problems.
Swinging support for fence
Curved moulding device
This curved moulding guard is the moulding guard generally supplied with our spindle moulders. The guard is suitable for spindle diameters from 30 to 50 mm.
"TAPOA" curved moulding guard
This curved moulding guard offers considerably more comfort compared to the CPS Tapoa 08 moulding guard, which is generally supplied with our machines. As a result, the position relative to the tool can be precisely set with an adjusting screw. The guard is suitable for spindle diameters from 30 to 50 mm.
"KOALA" curved moulding guard
This optional safety and working device enables the quick and safe moulding of curved workpieces, also with the feed unit. The BowmouldMaster can be easily and quickly mounted and adjusted on the machine table without tools. It enables moulding to be carried out in an anti-clockwise and clockwise direction. It is supplied instead of the standard CPS Tapoa 08 guard. You can either work with a ring fence (option) or a curved moulding fence (option).
“BowmouldMaster” curved moulding guard
The curved moulding fence is available for 6 different cutter arbor diameters: 30 mm, 35 mm, 40 mm, 50 mm, 1¼'' and 1½''. The height of the curved moulding fence is adjusted automatically with the level adjustment of the moulding tool. The moulding depth can be precisely and infinitely variably set via the scale on the curved moulding fence.
Curved moulding fence, suitable for "BowmouldMaster"
Cutter arbor - clamping system
The standard cutter arbor clamping system for the spindle moulders is the SK40 system. The standard quick-change system DornFix permits the quick change between arbors with a wide variety of diameters. The supplied torque spanner always ensures that the tightening torque is correct. We recommend the HSK systems for frequent arbor or arbor/tool changes.
Clamping system for cutter arbor SK40
This cutter arbor quick-change system is ideal for frequent arbor change or change from arbor/tool units. The system works completely without tools and is compatible e.g. with CNC machining centres of the leading manufacturers. Delivery only in conjunction with infinitely variable rotational speed control, including a cutter arbor HSK 85 PowerLock, ø 30 mm, clamping length 140 mm.
HSK 63 F cutter arbor quick-change system
This cutter arbor quick-change system is ideal for frequent arbor change or change from arbor/tool units. The system works completely without tools and is compatible e.g. with the Weinig PowerLock System. Delivery only in conjunction with infinitely variable rotational speed control, including a cutter arbor HSK 85 PowerLock, ø 30 mm, clamping length 140 mm.
HSK 85 PowerLock cutter arbor quick-change system
The clamping length of this arbor is 140 mm.
Cutter arbor ø 30 x 140 mm
The diameter of this arbor is 35 mm, the max. clamping length 140 mm. The max. permissible speed of this arbor is 12,000 rpm.
Cutter arbor, ø 35 x 140 mm
The diameter of this arbor is 40 mm, the max. clamping length 160 mm. The max. permissible speed of this arbor is 12,000 rpm.
Cutter arbor, ø 40 x 160 mm
The diameter of this arbor is 50 mm, the max. clamping length 160 mm. The max. permissible speed of this arbor is 12,000 rpm.
Cutter arbor, ø 50 x 160 mm
This arbor is only available for the SK40 system. The diameter is 50 mm, the max. clamping length 200 mm. The max. permissible speed of this arbor is 9,000 rpm.
Cutter arbor, ø 50 x 200 mm
The diameter of this arbor is 30 mm, the max. clamping length 80 mm. The max. permissible speed of this arbor is 12,000 rpm.
Cutter arbor, ø 30 x 80 mm
The diameter of this arbor is 50 mm, the max. clamping length 60 mm. The max. permissible speed of this arbor is 12,000 rpm.
Cutter arbor, ø 50 mm x 60 mm, with threaded head M16 x 2 mm
The diameter of this arbor is 1.25", the max. clamping length 140 mm. The max. permissible speed of this arbor is 12,000 rpm.
Cutter arbor, ø 1 1/4" x 140 mm
The diameter of this arbor is 1.5", the max. clamping length 160 mm. The max. permissible speed of this arbor is 12,000 rpm.
Cutter arbor, ø 1 1/2" x 160 mm
If you also wish to use your router tools, normally end mills, on the spindle cutter, the collet arbor is the ideal option for your spindle cutter. The spring collets are easy to exchange and available for end mill shank diameters of 3-25 mm, so that the arbor can be used flexibly. The fence of the T27 can be also mounted further towards the rear by 125 mm for easy cutting of dovetail joints. The optional infinitely variable rotational speed control is recommended in conjunction with small tool diameters.
Collet arbor
Please state the required inner diameter. The following diameters are available: 6, 8, 10, 12, 16, 18, 20 mm
Spring collets for collet arbor
Sliding table for tenoning and mortising work
Small tenoning and mortising jobs or cutting counter profiles can be easily carried out on the handy small sliding table with 710 mm travel. In this respect, the sliding carriage is simply mounted on the machine table in front of the fence and moves easily on high-quality ball bearings. The sliding table is equipped with a mitre fence (adjustable from 30° - 150° by simple adjustment of the pivot and clamping bolts) and a strong, quickly adjustable eccentric clamping device with pressure plate.
Sliding table for easy tenoning and mortising work
The sliding table is the ideal partner irrespective of whether you profile larger cross-sections across the grain, cut counter profiles or carry out tenoning and mortising tenoning work. The sturdy table provides a large and safe support and can be turned in both directions by up to 45°, and even up to 65° in the case of the fence. As a result, diagonally cut workpieces, e.g. in special window construction, can also be securely clamped and processed. The sliding table has a large travel of 1,400 mm, in order to enable the safe processing of large workpieces. Tools up to 350 mm ø can be safely used on a 40 mm arbor with the supplied mortising guard. If the sliding table is not required, it forms a perfect left-hand table extension, since the table can be lowered to machine table level. The guide beam can be easily moved to the rear and is thereby level with the front of the machine. If the mortising guard is used, the max. speed is limited to 4,500 rpm (or 4,800 rpm with infinitely variable rotational speed). If a feed support leg is required, it can only be mounted on the right of the spindle.
Sliding table for difficult tenoning and mortising work
Extension to 2.75 m for cross-cut fence LAS
Multiple stop for cross-cut fence LAS
This accessory is used as an adjustable fence for work on workpieces with finished size.
Fence for mortising work
Feed
A support leg cannot be assembled without a cast-iron console. The console is mounted on the left of the table top as standard. It is mounted on the right when combined with the large sliding table or at the express request of the customer.
Cast-iron console for assembly of a feed support leg
The universal support leg impresses with the simple swivelling away and positioning with the Memo-Lock system. This means that the feed locks home exactly in the starting position after being swivelled away e.g. for a tool exchange. The height adjustment is very precise as a result of the digital height display. The height is adjusted quickly and comfortably from the operator side. Large-sized locking levers ensure that the support leg can be clamped quickly and easily.
Comfort feed support leg
The high-performance Variomatic 3N 3-roller feed unit speaks for itself with its infinitely variable speed control from 2 – 18 m/min and the easy change from horizontal to vertical use. Switching from clockwise and anti-clockwise rotation as well as forwards / backwards is also a feature of this feed.
Variomatic 3N feed unit, for comfort feed support leg
The high-performance Variomatic 4N 4-roller feed unit speaks for itself with its infinitely variable speed control from 2 – 18 m/min and the easy change from horizontal to vertical use. Switching from clockwise and anti-clockwise rotation as well as forwards / backwards is also a feature of this feed.
Variomatic 4N feed unit, for comfort feed support leg
The high-performance Variomatic 3N 3-roller feed unit speaks for itself with its infinitely variable speed control from 2 – 18 m/min and the easy change from horizontal to vertical use. Switching from clockwise and anti-clockwise rotation as well as forwards / backwards is also a feature of this feed.
Variomatic 3N feed unit, for feed support
The high-performance Variomatic 4N 4-roller feed unit speaks for itself with its infinitely variable speed control from 2 – 18 m/min and the easy change from horizontal to vertical use. Switching from clockwise and anti-clockwise rotation as well as forwards / backwards is also a feature of this feed.
Variomatic 4N feed unit, suitable for MARTIN feed support
The option enables quick and infinitely variable adjustment of the feed speed (control range 2 to 24 m/min.) to the Variomatic 3N and 4N feeds. This allows the feed to be perfectly adjusted to the respective task. Since the control is provided purely electronically over the entire speed range, the feed speed is completely integrated in the controller and program memory.
Electronically adjustable feed speed
Miscellaneous
Not until you have a mastered machine to perfection can you exploit its maximum potential. Thorough on-site training by a MARTIN factory technician enables you to fully benefit from your machine.
On-site training / Commissioning
We offer tailored inspection and maintenance services for your MARTIN machines. You thereby maintain the operational readiness and accuracy of your machine over many years.
Inspection / maintenance by factory technician on site as per Martin maintenance schedule
For the use of the Configurator, please turn your device by 90°.
We will send you a non-binding offer
T27
Fields marked with * must be completed. We will, of course, treat your data as confidential.