More comfort and a better overview
Integrated auxiliary fence
Intelligent technology – TERSA centrifugal clamping
Modern SUVA bridge guard
The operation of the T54 is as simple as it is effective. Irrespective of whether you set the depth of cut or switch the machine on or off, everything is in one place and easily accessible. You also reach the hollow / pointed joint adjustment from here, the scale shows you the setting.
TERSA solid steel cutter block
The TERSA solid steel cutter block Z2 on the T54 offers many practical advantages: The high running smoothness in the precision bearings and the exact positioning of the form-locked reversible blades result in an extremely accurate cutting circle – and thus the best conditions for cleanly planed surfaces. The TERSA reversible blades are available in four different qualities, i.e. for all tasks, and the cutter block can also be supplied as a Z4 cutter block on request. Changing the blades takes less than a minute per blade.
The ball-bearing guided jointing fence runs smoothly and without tilting on tempered raceways – as precisely for many years to come as it does on the very first day. Chamfers can also be planed in a flash, because any angle between 90° and 45° can be set quickly with the user-friendly one hand operation. The integrated auxiliary fence which makes the processing of narrower workpieces considerably safer is worth mentioning.
The machine frame of the T54 is a sturdy and thick-walled composite structure whose design can only be found with this degree of technical perfection in MARTIN machines. Otto Martin invented this method of construction in the 1920s and had it registered as a design patent back then. Today, after more than 90 years of continual improvement, MARTIN still uses this simple and effective principle of frame construction. The intelligent combination of steel and concrete creates a high quality machine frame which is unparalleled when it comes to stability, damping capacity and torsion resistance. The vibrations which occur in any planer are absorbed many times more effectively than in cast-iron or even welded frames. This frame is the perfect basis for perfect work!
Controls and Features
Xplane solid steel cutter block
This option moves the operating controls attached to the infeed table as standard above the table level. The depth of cut is digitally displayed and precisely set by turning knob. The hollow / pointed joint display is also very clear and easy to survey. That’s good for anyone who likes to have the most important thing in sight. If you move the jointing fence over the table, the control panel moves along with it and is therefore always within easy reach.
Control panel moving with jointing fence
The new 3-row Xplane cutter block from MARTIN impresses even when idling with remarkably smooth running. This impression is reinforced as soon as the block is engaged, as the block operates extremely quietly. Even the biggest depths of cut require a surprisingly low motor rating – another advantage. However, the surface quality which can be achieved with the Xplane, even on difficult woods, is really breathtaking.
- Optimum health and safety by reducing the perceived noise exposure by 50%
- The highest surface quality thanks to the further improved 3-row design
- Minimised tear-outs due to shear cuts and the MARTIN XS cut of the blades
- Low chip volumes and excellent chip flow thanks to an optimised layout
- Reduced manual forces and high-grade surfaces thanks to MARTIN XS cut of the blades
- Cost saving thanks to up to 20 times longer service life of the carbide blades as well as four cutting edges per blade
- Cutter block speed 6,000 rpm, therefore optimum cutting speed
The “SUVAMATIC” guard protects the entire planing area with a single cutter block guard. The folding infeed beak is very practical. This generates a slight contact pressure of the cutter block guard against the joining stop, depending on the setting. This promotes the joining quality considerably.
The standard auxiliary fence is already integrated in the surfacing fence, in order to guide small, narrow workpieces safely over the machine table. This is an important contribution to improving health and safety.
T45 and T54: Two singles – a perfect couple
You encounter two specialists which complement each other to perfection with the T54 surface planer and the T45 planer. Each of the machines is designed for its task without any compromises and provides optimum work results. The required machine is immediately available without time-consuming conversions and the two machines together take up hardly any more space than a combination machine thanks to the space-saving set-up. In contrast to a combination machine, both machines can also be operated in parallel without any restrictions – even by one person through optimum handling and the short distances.
Configure your individual T54