Sliding tabel saw T60A

This guard, which is mounted directly on the riving knife, enables you to use saw blades with a diameter up to 315 mm. The max. cutting height is 87 mm.

This package consists of a height-adjustable guard for blade diameters of 400 mm incl. exchangeable rear part for mitre cuts, a 5.5 kW motor (rotational speeds of 4,000 / 4,800 / 6,000 rpm) incl. electronic soft start braking device. You obtain a max. cutting height of 130 mm with a saw blade diameter of 400 mm.

This package provides the T60A with a 5.5 kW motor (rotational speeds 4,000 / 4,800 / 6,000 rpm) incl. electronic soft start braking device and a riving knife guard for saw blades up to a diameter of 400 mm. The max. cutting height is 130 mm. Please note: The machine does not meet the CE requirements!

Standard voltage supply: 3 ~ / 400 V - 50 Hz

Motor power 5.5 kW

Standard voltage supply: 3 ~ / 400 V - 50 Hz

Standard voltage supply 3 ~ / 400 volts - 50 Hz

Version of the machine for special voltage 3~ / 230 volts - 50 Hz

Version of the machine for special voltage 3~ / 210 - 240 V - 60 Hz

Special voltage: 3 ~ / 440 - 480 volts - 60 Hz

The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. The table length corresponds to the cutting length.

The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. Standard cutting length 3.0 m, the table length corresponds to the cutting length.

The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. The table length corresponds to the cutting length.

The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. The table length corresponds to the cutting length.

Optional cutting width 1,350 mm

The cutting width adjustment takes place manually according to a scale. A fine adjustment enables precise settings.

The hand wheel enables positioning and fine adjustment of the rip fence from the operating position according to a digital display (travelling along or at eye level in the controller). The fence is also comfortably released / clamped from the operating position.

The display moves along on the fence carriage or is located in the controller at eye level (depending on the model and version). The display can be quickly and easily set to the current jaw position (narrow/wide) by pressing the button.

The trimming of veneered or laminated boards is only one area of application of the edging device. This accessory is simply pushed onto the circular saw fence. It can also be used as a substitute for the laser for cutting-to-size after marking out. The jaw length is 1,000 mm.

The unit individually sets both the scoring position left/right on the basis of the stored saw blade data fully automatically. You specify the scoring height electronically, the setting is also provided automatically. The adjustment ranges of the two axes are clearly displayed and easy to understand. Any requisite fine adjustment is therefore child's play. It goes without saying that all settings are stored and not lost when switching off the unit / machine. A special feature of our scorer is the pneumatic lifting / lowering of the scoring saw blades. As a result, the unit is activated in seconds and also quickly taken out of service again. This reduces noise and increases safety. If the machine is equipped with this scoring saw unit, you can nevertheless use main saw blades up to Ø 500 mm (T65 and T70; T60A and T60C up to 400 mm) together with inserted scoring saw blades. The scoring saw blades are simply removed, in order to use saw blades with a max. diameter of 550 mm (T65 and T70). Delivery without scoring saw blades.

Delivery cpl. with spacer discs. Saw blade Ø 120 mm, borehole Ø 22 mm

The fitting system allows easy adjustment of the scoring width (2.8 to 3.6 mm) on the stationary scoring saw unit Delivery cpl. with 120 mm Ø saw blades

Marks the danger zone of the scorer during operation with a light which increases the level of attention. MARTIN thereby provides you with a considerable increase in safety.

This sturdy cross-cut table is light in spite of its size of 1,340 x 650 mm and forms part of the basic equipment of all saws. It can be attached over the complete length of the sliding table. The clamping is comfortably provided with one hand. The roller facilitates the mounting and removal of larger workpieces and prevents damage to the surface and edges. A large angle scale enables precise mitre cuts between 0° and 50° through simple turning of the cross-cut fence. The fixed angle gauge is precisely incorporated in the table in a single work step and facilitates the quick cutting of standard angles (0°/22.5°/30°/45°).  

The mitre cross-cut table from MARTIN has set standards in flexibility for more than 50 years. No matter whether you wish to execute precise mitre cuts with a high accuracy of fit in large boards or process small beads, the mitre cross-cut table always provides perfect support just where you need it. You use a handle to undo the sturdy 0° arresting device and adjust the table in the range of ± 46° according to the LCD display. Owing to the utility model-protected 3-piece swing arm, neither a moving extension arm construction nor a stationary arm above the table have any negative effects. The distance between the cross-cut fence and saw blade which arises in angle adjustments, e.g. when processing thin beads, was often problematic. To change the angle, the operator simply pushes the cross-cut fence against the stop created by the ParaGlider, so that work is always carried out with a minimum distance between the cross-cut fence and saw blade.

The support can be infinitely variably extended up to 750 mm, with a roller to protect the workpiece.

If you work with cutting lengths > 3.7 m, you have to support the cross-cut table directly on the floor with a roller support. The roller support replaces the support arm of the machine. The roller support cannot be combined with the mitre cross-cut table. Several cross-cut tables with roller support can also be combined on one machine for processing large, heavy materials.

The support can be infinitely variably extended up to 750 mm, with a roller to protect the workpiece.

You obtain an additional standard cross-cut table for your machine with this option. A roller support is required for use as a supplementary table and for machines without a tilting arm.

If you work with cutting lengths > 3.7 m, you generally have to support the cross-cut table directly on the floor with a roller support instead of using the support arm. The roller support is also required if an additional cross-cut table is to be used on the machine, e.g. for processing large heavy boards. Several cross-cut tables with roller support can also be combined on one machine for processing large, heavy materials. The roller support cannot be combined with the mitre cross-cut table.  

Fine adjustment is regarded as an indispensable quality feature of a good cross-cut fence by experienced woodworkers. The cutting dimension often only has to be altered by just a small amount, which is almost impossible without fine adjustment. It is all the better that both stop elements are provided with a magnifier and fine adjustment. The cross-cut fence also stands out because of the smooth operation of the fence carriages. Both stop elements run on high-quality linear bearings made of wear-resistant high-performance polymer and can be used over the entire length of the fence jaw. The cross-cut fence can be used in either the front or rear position of the cross-cut table with just a simple movement and no need for lifting. The tilting angle can be infinitely adjusted up to 50° in either position according to a scale. The corrected cutting dimension is conveniently and precisely calculated for any desired angle by the controller.

The dimension display on this cross-cut fence with 2-point alignment is provided in analogue form, i.e. using a scale. In contrast to the version with full-length support, the workpiece rests on two points in this fence. Only in this way can slightly concave first cuts, perhaps caused by stresses in the board, also be precisely cut at an angle. Cutting lengths of 190 - 2020 mm can be set quickly and extremely accurately thanks to the scale, which can be easily read with the magnifier, and the standard fine adjustment for the inner stop element. The quick clamp enables you to change the ball-raced stop element quickly from dimension to dimension and cut lengths up to 3310 mm with the extendable outboard stop. If you prefer to work with digital exact dimensions, the digital cross-cut fence is the right option: The inner and outer stop work with separate measuring devices and can therefore be set independently with an accuracy of a tenth of a millimetre. Each display can be changed over to display relative dimensions, in order to execute incremental cuts quickly, for example.

The dimension display on this cross-cut fence with 2-point alignment is provided digitally, i.e. using electronic displays. In contrast to the version with full-length support, the workpiece rests on two points in this fence. Only in this way can slightly concave first cuts, perhaps caused by stresses in the board, also be precisely cut at an angle. Cutting lengths of 190 - 2020 mm can be set quickly and extremely accurately thanks to the clearly legible digital displays and the standard fine adjustment for the inner stop element. The quick clamp enables you to change the ball-raced stop element quickly from dimension to dimension and cut lengths up to 3310 mm with the extendable outboard stop. The digital cross-cut fence is always the right option: The inner and outer stop work with separate measuring devices and can therefore be set independently with an accuracy of a tenth of a millimetre. Each display can be changed over to display relative dimensions, in order to execute incremental cuts quickly, for example.

The dimension display on this cross-cut fence with full-length support is provided in analogue form, i.e. using a scale. In contrast to the 2-point version, this model has large flip stops and the full length of the workpiece rests on the fence. For example, this is ideal if you work a lot with thin flexible material. The wood to be cut is straightened by the fence and can therefore be cut accurately to size. As in the case of a 2-point alignment, the inner stop element with fine adjustment and scale magnifier can be precisely adjusted. The quick clamp of the stop element supports quick dimension change between 205 and 2020 mm, whereas lengths up to 3310 mm can be set with the extendable outboard stop. If you prefer to work with digital exact dimensions, the digital cross-cut fence is the right option: The inner and outer stop work with separate measuring devices and can therefore be set independently with an accuracy of a tenth of a millimetre. Each display can be changed over to display relative dimensions, in order to execute incremental cuts quickly, for example.

The dimension display on this cross-cut fence with full-length support is provided digitally, i.e. using electronic displays. In contrast to the 2-point version, this model has large flip stops and the full length of the workpiece rests on the fence. For example, this is ideal if you work a lot with thin flexible material. The wood to be cut is straightened by the fence and can therefore be cut accurately to size. In conjunction with the quick clamp of the stop element, the clearly legible digital displays and the standard fine adjustment for the inner stop element support quick dimension change between 205 and 2020 mm, whereas lengths up to 3310 mm can be set with the extendable outboard stop. The digital cross-cut fence is always the right option: The inner and outer stop work with separate measuring devices and can therefore be set independently with an accuracy of a tenth of a millimetre. Each display can be changed over to display relative dimensions, in order to execute incremental cuts quickly, for example.

Not available for T70 and T75 or the heavy cross-cut fences with 2-point system and the respective flip stops.

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for the standard cross-cut fence of the T60A, T60C and T65

Not available for standard cross-cut fences of the T60A, T60C and T65

Not available for the standard cross-cut fence of the T60A, T60C and T65

The analogue fence is characterised by a high setting precision thanks to a large angle scale; the mitres can be cut from both sides. Apart from a precise mitre cut, an exact length on the workpiece is also required in most application cases. A length compensation was therefore provided for ten preferred angles (0°, 5°, 10°, 15°, 22,5°, 30°, 45°, 50°, 60° and 67.5°). The fences can be used on alternating sides and permit cutting lengths from 90 – 1,375 mm. An excellent feature of the MitreX is the utility model-protected tear-out prevention block, which guarantees tear-free cuts. It is also just as useful for cutting after marking out. The one-handed clamping means that attachment to the sliding table is simplicity itself. The fence is very stable but nevertheless lightweight and is supplied with a wall bracket.

The digital fence is characterised by a high setting precision thanks to a large angle scale and the additional digital angle display (resolution 0.01°). Mitres can be cut from two sides. Apart from a precise mitre cut, an exact length on the workpiece is also required in most application cases. A length compensation was therefore provided for ten preferred angles (0°, 5°, 10°, 15°, 22,5°, 30°, 45°, 50°, 60° and 67.5°). The fences can be used on alternating sides and permit cutting lengths from 90 – 1,375 mm. An excellent feature of the MitreX is the utility model-protected tear-out prevention block, which guarantees tear-free cuts. It is also just as useful for cutting after marking out. The one-handed clamping means that attachment to the sliding table is simplicity itself. The fence is very stable but nevertheless lightweight and is supplied with a wall bracket.

The table surface is approx. 600 x 350 mm and foldable. The accessory is not available for a sliding table length of 1.9 m.

The "second support" is very useful for processing large boards and serves as a support when working with the mitre fence. The accessory can be used as a simple parallel cutting aid when combined with the "rip fence for sliding table".

The rip fence is simply attached to the "second support". The accessory permits parallel cuts of up to 800 mm on the sliding table. The "second support" is a prerequisite.

Installation is provided in the sliding table groove at any position of the sliding table. Max. clamp height 150 mm, clamp stroke 10 mm.

Installation is provided in the sliding table groove at any position of the sliding table. The clamp has a pneumatic safety cylinder, the cylinder stroke is 0 - 100 mm.

MARTIN offers an ingenious pressure bar for the sliding table, in order to extend the functional capabilities of your sliding table saw. It is easy to cut thin boards, Resopal laminate or veneer with this. With a stroke height of 100 mm and a contact pressure of 800 N, large workpieces can also be processed safely and precisely. The pressure bar can also be used with a cross-cut fence for exact workpiece positioning. This can be positioned at the end or beginning of the bar and between the pressure elements. Angle cuts are also possible. In this regard, the "interfering" pressure segments are simply switched off and therefore remain in the top position. The pressure bar is provided with a continuous control panel for quick and intuitive operation. This enables operation from any position on the sliding table. The commissioning of the pressure bar is simplicity itself. It is mounted directly on the sliding table at two points, screwed together with this and connected to the compressed air line of the machine – finished. Max. cutting length with cross-cut fence in front or rear position: 1,590 mm, 1 actuated clamping element @ 1,095 mm, max. workpiece length without cross-cut fence: Length of sliding table minus 160 mm.

MARTIN offers an ingenious pressure bar for the sliding table, in order to extend the functional capabilities of your sliding table saw. It is easy to cut thin boards, Resopal laminate or veneer with this. With a stroke height of 100 mm and a contact pressure of 800 N, large workpieces can also be processed safely and precisely. The pressure bar can also be used with a cross-cut fence for exact workpiece positioning. This can be positioned at the end or beginning of the bar and between the pressure elements. The pressure bar is provided with a continuous control panel for quick and intuitive operation. This enables operation from any position on the sliding table. The commissioning of the pressure bar is simplicity itself. It is mounted directly on the sliding table at two points, screwed together with this and connected to the compressed air line of the machine – finished. Max. cutting length with cross-cut fence in front or rear position: 2,690 mm, 2 jointly actuated clamping elements @ 1,095 mm, max. workpiece length without cross-cut fence: Length of sliding table minus 160 mm.

MARTIN offers an ingenious pressure bar for the sliding table, in order to extend the functional capabilities of your sliding table saw. It is easy to cut thin boards, Resopal laminate or veneer with this. With a stroke height of 100 mm and a contact pressure of 800 N, large workpieces can also be processed safely and precisely. The pressure bar can also be used with a cross-cut fence for exact workpiece positioning. This can be positioned at the end or beginning of the bar and between the pressure elements. The pressure bar is provided with a continuous control panel for quick and intuitive operation. This enables operation from any position on the sliding table. The commissioning of the pressure bar is simplicity itself. It is mounted directly on the sliding table at two points, screwed together with this and connected to the compressed air line of the machine – finished. Max. cutting length with cross-cut fence in front or rear position: 2,990 mm, 2 jointly actuated clamping elements @ 1,250 mm, max. workpiece length without cross-cut fence: Length of sliding table minus 160 mm.

MARTIN offers an ingenious pressure bar for the sliding table, in order to extend the functional capabilities of your sliding table saw. It is easy to cut thin boards, Resopal laminate or veneer with this. With a stroke height of 100 mm and a contact pressure of 800 N, large workpieces can also be processed safely and precisely. The pressure bar can also be used with a cross-cut fence for exact workpiece positioning. This can be positioned at the end or beginning of the bar and between the pressure elements. The pressure bar is provided with a continuous control panel for quick and intuitive operation. This enables operation from any position on the sliding table. The commissioning of the pressure bar is simplicity itself. It is mounted directly on the sliding table at two points, screwed together with this and connected to the compressed air line of the machine – finished. Max. cutting length with cross-cut fence in front or rear position: 3,390 mm, 3 actuated clamping elements, 2 of which can be independently disconnected @ 908 mm, max. workpiece length without cross-cut fence: Length of sliding table minus 160 mm.

The clamping and sawing system for sliding table saws is designed for the ergonomic, safe and efficient cutting of workpieces. The new system is an effective guard which can be installed and adjusted in no time without the need for tools. When sawing oblique, short, narrow and wedge-shaped workpieces of different sizes, the health and safety regulations are often disregarded based on the assumption that it is quicker that way. The new guard for sliding table saws puts an end to the excuses as it makes the safe option impressively quick without the need for tools or any significant loss of time. The clamping and sawing system is available in a standard and a comfort version. A storage board for wall mounting which is suitable for both versions ensures that each individual component of this workplace protection device is always in the right place and quickly to hand. The set consists of:

1 Zuführanschlag
• 1 Hilfsanschlag schräg
• 1 Schwenkspanner
• Wandmontageplatte

The clamping and sawing system for sliding table saws is designed for the ergonomic, safe and efficient cutting of workpieces. The new system is an effective guard which can be installed and adjusted in no time without the need for tools. When sawing oblique, short, narrow and wedge-shaped workpieces of different sizes, the health and safety regulations are often disregarded based on the assumption that it is quicker that way. The new guard for sliding table saws puts an end to the excuses as it makes the safe option impressively quick without the need for tools or any significant loss of time. The clamping and sawing system is available in a standard and a comfort version. A storage board for wall mounting which is suitable for both versions ensures that each individual component of this workplace protection device is always in the right place and quickly to hand. The set consists of:

1 Zuführanschlag
• 1 Hilfsanschlag schräg
• 2 Hilfsanschlägen schmal
• 2 Schwenkspannern
• Wandmontageplatte

Not until you have a mastered machine to perfection can you exploit its maximum potential. Thorough on-site training by a MARTIN factory technician enables you to fully benefit from your machine.

We offer tailored inspection and maintenance services for your MARTIN machines. You thereby maintain the operational readiness and accuracy of your machine over many years.