T75 PreX

Sliding table T75 PreX

If you wish to bequeath a classic machine to the next generation today.

We have incorporated a great many innovative solutions in this premium sliding table saw, so that you have free reign. For example, the circular saw T75 PreX enables you to execute any mitre cut on the cross-cut and rip fence in the best way for your tasks and the material to be processed. This is possible because we have combined a cutting height of more than 200 mm with a swivelling range of 2x 46° for the first time anywhere in the world.
Swivelling range 2x 46°
”RadioCompens” mitre cut system
Dual swivel drive
Freely combinable guards
The cornerstone of operation
Schwenkbereich 2x 46°
Dualer Schwenkantrieb
Längenanschlag mit Splitterholz
Touch-Screen
Schutzhauben
Besäumtisch
Parallelanschlagführung

Experience the T75 PreX!


Swivelling range 2x 46°

A cutting height of more than 200 mm and a swivelling range of 2 x 46° have been combined in a machine for the first time anywhere in the world. The possibility of tilting the saw blade of a sliding table saw by 2 x 46° enables a workpiece to be machined as the user sees fit for the very first time. A T75 PreX always makes the decision easy, irrespective of whether you are impressed by the cutting quality, the safety or the time-saving.

Dual swivel drive

MARTIN has also revolutionized the swivel drive of sliding table saws with the T75 PreX. This is because we want you to operate your machine with the precision you are used to from a MARTIN. It was especially challenging for our developers to precisely adjust a saw console of this dimension over a tilting angle of 92° to 0.01°. The answer is an innovative bilateral drive, the MARTIN DualDrive. The CANBus motor evenly transmits its power to both sides of the tilting mount, thereby moving and positioning it extremely accurately. The two synchronous chain drives guarantee a precisely set saw blade and a perfect cutting result for any angle. The system is completely resistant to dirt and wear and tear. A built-in sensor monitors the angle position and permanently adjusts the measured values to your specifications in the controller. You can count on this.

Cross-cut fence with tear-out prevention block

The cross-cut fence of the T75 PreX was barely affected by doubling the tilting angle of the saw blade to 92°. You are provided with a high-quality cross-cut fence which can be retracted to a safety position if you tilt the blade downwards to the left. This creates space for the guard, which now has to cover this area, of course. The cross-cut fences of the T75 PreX offer an optimum contact surface for short workpieces in the safety position thanks to an ingenious retraction mechanism whose contact block also serves as a tear-out prevention block in any position of the fence, and your cutting result is always perfect.

Touchscreen

The high-end T75 machine supports you with its modern 5.7” (145 mm) touchscreen controller at the highest performance level. This modern form of machine operation, which has already proven itself a thousand times over in practical use, not only provides easy handling of the machine but also supports you in calculating the workpiece dimensions and adjustment of the fences. This reduces set-up times and the work becomes much, much more comfortable. The user interface was developed in close cooperation between industrial graphic designers, users and MARTIN. The 10.4″ variant of the screen is available as an option.

Guards

The guard of the T75 PreX has been registered for patent and offers the user a new dimension in flexibility and safety. The developers paid particular attention to ensuring the perfect functioning of the guard of this machine during the development of the T75 PreX. Nevertheless, a saw blade protruding up to 204 mm has to be safely covered over a tilting range of 92° without constantly interfering with the operator’s work. The sides of the guard are available in different sizes and can be combined in any variation. The space required by the guard can be perfectly tailored to the cutting area and thus the zone of protection through a combination of these different sizes. As a result, you always have the maximum available space to work in and are always perfectly protected. The controller calculates the maximum permissible tilt angle and blade protrusion on each side for the respective guard combination, thereby significantly improving health and safety.

Sliding table

The MARTIN steel guide system, which has been continuously optimized since 1959, is used as a sliding-table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the hardened running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality.
The replaceable table lip – unique to MARTIN – easily enables the damage caused by large deflected saw blades to be “undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required.

Rip fence guide

To move the rip fence of the T75 quickly and easily, you simply press a button on the fence and move it smoothly to the desired position according to a digital display. However, we recommend that the T75 is equipped with the optional controlled rip fence. This provides you with effective support for the quick and precise positioning of the cutting width. The intuitive operation via the touchscreen controller reduces dimensional errors and makes a substantial contribution to achieving the perfect cut.
The fence is elaborate and precision-guided on four sturdy grooved ball-bearings. This design provides smooth running at all times for maximum durability and angular accuracy. The sturdy jaw moves freely over the table without support and is therefore not affected by dirt and sawdust on the table. The unique design allows the rip fence to be lowered below the table level quickly and easily, so that even long workpieces can be comfortably sawn.

Cross-cut fence

All the T75 machines are equipped with the unique MARTIN 2-point cross-cut fence as standard. The key advantage of this fence is that it offers two-point support for the workpiece. Only in this way can slightly convex first cuts, which repeatedly occur as a result of stresses in the board, always be precisely cut at an angle. The quick clamping device allows you to change the ball-raced stop element quickly from dimension to dimension. Our flip stop with full-length support is also available as an option.
placeholder-img
Controls and Features
3-Achs_Vorritzsäge

Scoring-saw unit

The patented 3-axis system from MARTIN offers you the maximum comfort and pinpoint accuracy owing to its complete integration in the controller. The three axes – scoring height, scoring position and scoring width – are positioned with electronic monitoring without further intervention. A quick-clamping holder enables the scoring saw package to be completely removed in next to no time, e.g. if saw blades > 400 mm diameter are required. This means that waiting times for resetting are a thing of the past and no delicate parking operations are required.
SafeLight

SafeLight

If the scorer is running, the light integrated in the table insert draws the operator’s attention to the operating situation. MARTIN thereby provides the user with a considerable increase in safety.
Parallelogrammquertisch

Mitre cross-cut table

Otto Martin invented the mitre cross-cut table more than 50 years ago to enable operators to make precise angle cuts on larger panels. This popular accessory has been steadily improved and optimised since that time. Whereas a scale was all that was required to set mitre cuts in 1958, the latest table includes a modern digital angle display and a fine angle adjustment. The fence can be adjusted on both sides to any angle up to 47°, and the angle is displayed with a resolution of 0.01°. A strong central lock ensures reliable repeatability of the correct angle. It is not without good reason that more than three quarters of all the customers who buy MARTIN sliding table saws opt for the sturdiness, functionality and precision of this impressive invention.
Winkelschnittsystem "Radio-Compens"

”RadioCompens” mitre cut system

The innovative ”RadioCompens” mitre cut system provides fully automatic length compensation for mitre cuts and double mitre cuts by means of a wireless connection between the mitre cross-cut table, controller and digital display of the cross-cut fence. Thanks to this wireless-supported communication of the cross-cut table, controller and stop elements, time-consuming set-up times for mitre cuts are reduced by up to 80 %. You simply set the table to the desired angle and the electronic cutting length displays on the cross-cut fence immediately show you the corrected length dimension. In contrast to other systems in the market, “RadioCompens” compensates for a variety of saw blade thicknesses by itself fully automatically. As a result, you always have a precision cut with an accuracy of a tenth of a millimetre also on the left-hand side of the saw blade – irrespective of the saw blade you are currently using.
Digitaler Längenanschlag

Digital cross-cut fence

If you prefer to work with digitally exact dimensions, the digital cross-cut fence is the right option: the inner and outer stop work with separate measuring devices and can therefore be independently set with an accuracy of a tenth of a millimetre. Each display can be changed over to display relative dimensions, in order to e.g. execute incremental cuts quickly.
Like the analogue version, the digital version is also available as a flip stop with full-length support.
Vordertisch

Front support table

Lengthy, narrow workpieces are best cut with appropriate support. The foldable front support table helps to guide the workpiece
safely on the circular saw fence.
MitreX

MitreX

The analogue or digital fence is characterised by a high setting precision thanks to a large angle scale and the supplementary digital angle display. The mitres can be cut from two sides. Apart from a precise mitre cut, an exact length on the workpiece is also required in most application cases. A length compensation was therefore provided for ten preferred angles (0°, 5°, 10°, 15°, 22,5°, 30°, 45°, 50°, 60° and 67.5°). The fences can be used on alternating sides and permit cutting lengths from 90 – 1,375 mm.
An excellent feature of the MitreX is the utility model-protected tear-out prevention block, which guarantees tear-free cuts. It is also just as useful for cutting after marking out. The one-handed clamping means that attachment to the sliding table is simplicity itself. The fence is very stable but nevertheless lightweight and is supplied with a wall bracket.
Spann- und Anschlagsystem

Clamping and sawing system

The clamping and sawing system for sliding table saws is designed for the ergonomic, safe and efficient cutting of workpieces. The new system is an effective guard which can be installed and adjusted in no time without the need for tools. When sawing oblique, short, narrow and wedge-shaped workpieces of different sizes, the health and safety regulations are often disregarded based on the assumption that it is quicker that way. The new guard for sliding table saws puts an end to the excuses as it makes the safe option impressively quick without the need for tools or any significant loss of time. The clamping and sawing system is available in a standard and a comfort version. A storage board for wall mounting which is suitable for both versions ensures that each individual component of this workplace protection device is always in the right place and quickly to hand.
Zweite Auflage

Second support

The optional second support supports you in the true sense of the word. It is easily attached to the sliding table and simplifies the cutting-to-size of larger boards to a considerable extent. The workpieces are securely supported by the 600 mm long support and can therefore be perfectly cut.
Enhanced by the “rip fence” option, the support becomes a perfect rip fence which assists you e.g. in trimming work.
EIN-AUS am Besäumtisch

ON/OFF on the sliding table

The optional switching device for switching the main and scoring saw on and off enables you to start the machine and safely switch it off from any point of the sliding table. It can be positioned without the need for any tools and offers you the maximum degree of flexibility. For example, large boards can be positioned first of all, and the machine is then comfortably started from the operating position – wherever it may be located.
Besäumfix

Edging device

The trimming of veneered or laminated boards is just one area of application of the optional edging device. This accessory is simply pushed onto the circular saw fence. It can also be used as a substitute for the laser for cutting-to-size after marking out.
Motorisch angetriebener Besäumtisch

Motorised sliding table

The motorised sliding table impresses as a result of its even feed, which ensures perfect cutting results and reduces complicated rework on the workpiece. Thick solid wood, plywood or chipboard and special materials such as plastics or non-ferrous metal plates can also be safely sawn with ease thanks to this powerful aid. Extension of the system with a
pneumatic pressure bar, the VacuSlide vacuum clamping device or a pneumatic clamp is ideal here.
Configure your individual T75 PreX
Model
The T75 is a premium machine that is setting new standards. A cutting height of more than 200 mm with a swivelling range of 2x 46° have been combined in a machine for the first time anywhere in the world. The operation of the machine offers everything which the discerning user expects from a MARTIN sliding table saw. The cutting height and angle are adjusted by electric motor via the controller, the cutting height, angle and width are digitally displayed. The basic equipment of the machine includes a swivelling range of 92°, a cutting height of 204 mm, a 7.5 kW motor and a cutting width of 850 mm. The cross-cut fence with its two 2-point stop elements is diagonally adjustable up to 47°.
Sliding table saw T75 PreX
Cutting height
Maximum cutting height 204 mm with blade diameter 550 mm
Cutting height 204 mm
Drive
Standard voltage supply: 3 ~ / 400 V - 50 Hz
Motor rating 7.5 kW
This drive enables you regulate the speed infinitely variably between 2,000 – 6,000 rpm. As a result of the optimum adjustment of the rotational speed to the material, both the cutting quality and service life of the saw blades are increased – which in turn reduces your costs. Furthermore, even a slight reduction in the rotational speed sometimes decreases the noise level significantly - something which makes the working environment considerably more pleasant. Only available for 3 ~ / 400 volts - 50 Hz and 3 ~ / 440 - 480 volts - 60 Hz. Connection to other voltage supplies possible with the optional transformer.
Infinitely variable rotational speed control 7.5 kW
This drive enables you regulate the speed infinitely variably between 2,000 – 6,000 rpm. As a result of the optimum adjustment of the rotational speed to the material, both the cutting quality and service life of the saw blades are increased – which in turn reduces your costs. Furthermore, even a slight reduction in the rotational speed sometimes decreases the noise level significantly - something which makes the working environment considerably more pleasant. Only available for 3 ~ / 400 volts - 50 Hz and 3 ~ / 440 - 480 volts - 60 Hz. Connection to other voltage supplies is possible with the optional transformer.
Infinitely variable rotational speed control 9.5 kW
This drive enables you regulate the speed infinitely variably between 2,000 – 6,000 rpm. As a result of the optimum adjustment of the rotational speed to the material, both the cutting quality and service life of the saw blades are increased – which in turn reduces your costs. Furthermore, even a slight reduction in the rotational speed sometimes decreases the noise level significantly - something which makes the working environment considerably more pleasant. Only available for 3 ~ / 400 volts - 50 Hz and 3 ~ / 440 - 480 volts - 60 Hz. Connection to other voltage supplies is possible with the optional transformer.
Infinitely variable rotational speed control 11 kW
Power supply
Standard voltage supply 3 ~ / 400 volts - 50 Hz
Voltage supply 400 volts / 50 Hz
Version of the machine for special voltage 3~ / 230 volts - 50 Hz
Special voltage 230 V / 50 Hz
Version of the machine for special voltage 3~ / 210 - 240 V - 60 Hz
Special voltage 210 - 240 V / 60 Hz
Special voltage: 3 ~ / 440 - 480 volts - 60 Hz
Special voltage 440 - 480 volts / 60 Hz
Sliding table
The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. The table length corresponds to the cutting length.
Sliding-table length 1.9 m
The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. Standard cutting length 3.0 m, the table length corresponds to the cutting length.
Sliding table length 3.0 m
The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. The table length corresponds to the cutting length.
Sliding-table length 3.3 m
The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. The table length corresponds to the cutting length.
Sliding-table length 3.7 m
The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. The table length corresponds to the cutting length, the scope of supply includes 2 support feet. Please note: Format cut with support arm max. 3.7 m, if required, work with roller support.
Sliding-table length 4.3 m
The MARTIN steel guide system, which has been continuously optimised since 1959, is used as a sliding table guide in our sliding table saws. The unbeatable advantage of the system is the absence of play owing to the functional principle combined with the permanent smooth and easy movement of the table. The fact that the tempered running surfaces are permanently lubricated with oil is a particular quality characteristic. Dust and dirt are thereby prevented from sticking permanently to the sliding surfaces and the movement of the table provides constant self-cleaning. Another important quality characteristic is that plastic parts are dispensed with in this component, which is so important for the cutting quality. The replaceable table lip - unique to Martin - easily enables the damage caused by large deflected saw blades to be "undone”. The table can be arrested every 20 mm. You thereby fix the table exactly in the position which is appropriate for you at the moment. No matter if you are working with jigs or applying material, the table is always positioned exactly where it is required. It goes without saying that all surfaces coming in contact with the workpiece are provided with a high quality anodized coating. Please state your required length! The table length corresponds to the cutting length, the scope of supply includes 2 support feet. Please note: Format cut with support arm max. 3.7 m, if required, work with roller support.
Sliding-table length freely selectable between 4.3 to 5.1m
VacuSlide is an efficient and intelligent workpiece clamping system for panel workpieces made of wood, plastic or non-ferrous metals. The system provides excellent performance, especially in the case of thin and/or delicate materials or angle and mitre cuts. Workpieces with a minimum width of 110 mm are securely clamped. The vacuum fields do not have to be preselected. VacuSlide is activated or deactivated via radio remote control. Delivery cpl. with vacuum generator, remote control, backwash system and a safety low pressure warning device. Supplied with 6 suction zones in two rows. VacuSlide cannot be combined with the motorised sliding table or when the rip fence is adjusted via hand wheel.
VacuSlide workpiece clamping system, 3.0 m
VacuSlide is an efficient and intelligent workpiece clamping system for panel workpieces made of wood, plastic or non-ferrous metals. The system provides excellent performance, especially in the case of thin and/or delicate materials or angle and mitre cuts. Workpieces with a minimum width of 110 mm are securely clamped. The vacuum fields do not have to be preselected. VacuSlide is activated or deactivated via radio remote control. Delivery cpl. with vacuum generator, remote control, backwash system and a safety low pressure warning device. Supplied with 7 suction zones in two rows. VacuSlide cannot be combined with the motorised sliding table or when the rip fence is adjusted via hand wheel.
VacuSlide workpiece clamping system, 3.3 m
VacuSlide is an efficient and intelligent workpiece clamping system for panel workpieces made of wood, plastic or non-ferrous metals. The system provides excellent performance, especially in the case of thin and/or delicate materials or angle and mitre cuts. Workpieces with a minimum width of 110 mm are securely clamped. The vacuum fields do not have to be preselected. VacuSlide is activated or deactivated via radio remote control. Delivery cpl. with vacuum generator, remote control, backwash system and a safety low pressure warning device. Supplied with 8 suction zones in two rows. VacuSlide cannot be combined with the motorised sliding table or when the rip fence is adjusted via hand wheel.
VacuSlide workpiece clamping system, 3.7 m
The motorised sliding table impresses as a result of its even feed, which ensures perfect cutting results and reduces complicated rework on the workpiece. Thick solid wood, plywood or chipboard and special materials such as plastics or non-ferrous metal plates can also be safely sawn with ease thanks to this powerful aid. Extension of the system with the pneumatic pressure bar or the VacuSlide vacuum clamping device is ideal here. The feed speed can be infinitely variably pre-selected from 1-25 m/min. The control unit is attached to the side of the sliding table, which means that there is no loss of cutting length. The scope of supply includes a second clamp shoe. Not available for 1.9 m sliding table length!
Motorised sliding table
Cutting width
Standard cutting width 850 mm
Cutting width 850 mm
Optional cutting width 1,100 mm
Cutting width 1,100 mm
Cutting width 1,350 mm
Cutting width 1,600 mm
Rip fence
The rip fence is moved by hand and adjusted according to scale.
Manual positioning of rip fence
The rip fence is completely integrated in the controller. This allows precise cuts in any situation.
Electromotive positioning of rip fence
The heavy, machined version of the rip fence profile with a special length of 2.0 m is supplied instead of the 1,200 mm standard jaw.
Extended rip fence profile 2.0 m
Heavy machined rip fence profile in a special length of 2.0 m. Supplied in addition to the 1,200 mm standard fence.
Additional extended rip fence profile 2.0 m
The trimming of veneered or laminated boards is only one area of application of the edging device. This accessory is simply pushed onto the circular saw fence. It can also be used as a substitute for the laser for cutting-to-size after marking out. The jaw length is 1,000 mm.
Edging device
This option enables comfortable, controlled folding of the rip fence below table level from the operating position. The option is very useful, especially if you repeatedly cut lengthy workpieces. It goes without saying that the fence can also be comfortably lifted from the operating position with automatic approaching of the original width position.
Pneumatically foldable rip fence
This option enables comfortable, controlled folding of the rip fence below table level from the operating position. The option is very useful, especially if you repeatedly cut lengthy workpieces. It goes without saying that the fence can also be comfortably lifted from the operating position with automatic approaching of the original width position.
Pneumatically foldable rip fence
This option enables comfortable, controlled folding of the rip fence below table level from the operating position. The option is very useful, especially if you repeatedly cut lengthy workpieces. It goes without saying that the fence can also be comfortably lifted from the operating position with automatic approaching of the original width position.
Pneumatically foldable rip fence
Scoring-saw unit
The unit individually sets both the scoring position left/right and the scoring width on the basis of the stored saw blade data fully automatically. You specify the scoring height electronically, the setting is also provided automatically. The movement ranges of the three axes are clearly displayed and easy to understand. Any requisite fine adjustment is therefore child's play. It goes without saying that all settings are stored and not lost when switching off the unit / machine. A special feature of our scorer is the pneumatic lifting / lowering of the scoring saw blades. As a result, the unit is activated in seconds and also quickly taken out of service again. This reduces noise and increases safety. If the machine is equipped with this scoring saw unit, you can nevertheless use main saw blades up to Ø 400 mm together with inserted scoring saw blades. The scoring saw blades are simply removed, in order to use saw blades with a max. diameter of 550 mm. Delivery with scoring saw blades.
3-axis scoring saw unit PreX
This accessory allows the rapid replacement of the scoring saw blades installed on the holder. Delivery cpl. with one set of scoring saw blades.
Quick-release receptacle for 3-axis scoring saw unit PreX
Saw blade Ø 140 mm, borehole Ø 36 mm
Scoring saw blade set for 3-axis scorer PreX
Marks the danger zone of the scorer during operation with a light which increases the level of attention. MARTIN thereby provides you with a considerable increase in safety.
SafeLight scorer light
Cross-cut table
This sturdy cross-cut table is light in spite of its size of 1,340 x 650 mm and forms part of the basic equipment of all saws. It can be attached over the complete length of the sliding table. The clamping is comfortably provided with one hand. The roller facilitates the mounting and removal of larger workpieces and prevents damage to the surface and edges. A large angle scale enables precise mitre cuts between 0° and 50° through simple turning of the cross-cut fence. The fixed angle gauge is precisely incorporated in the table in a single work step and facilitates the quick cutting of standard angles (0°/22.5°/30°/45°).  
Standard cross-cut table 1,340 x 650 mm
The mitre cross-cut table from MARTIN has set standards in flexibility for more than 50 years. No matter whether you wish to execute precise mitre cuts with a high accuracy of fit in large boards or process small beads, the mitre cross-cut table always provides perfect support just where you need it. You use a handle to undo the sturdy 0° arresting device and adjust the table in the range of ± 46° according to the LCD display. Owing to the utility model-protected 3-piece swing arm, neither a moving extension arm construction nor a stationary arm above the table have any negative effects. The distance between the cross-cut fence and saw blade which arises in angle adjustments, e.g. when processing thin beads, was often problematic. To change the angle, the operator simply pushes the cross-cut fence against the stop created by the ParaGlider, so that work is always carried out with a minimum distance between the cross-cut fence and saw blade.
Mitre cross-cut table
The support can be infinitely variably extended up to 750 mm, with a roller to protect the workpiece.
Extendable support for standard cross cut table
If you work with cutting lengths > 3.7 m, you have to support the cross-cut table directly on the floor with a roller support. The roller support replaces the support arm of the machine. The roller support cannot be combined with the mitre cross-cut table. Several cross-cut tables with roller support can also be combined on one machine for processing large, heavy materials.
Roller support for standard cross-cut table
The support can be infinitely variably extended up to 750 mm, with a roller to protect the workpiece.
Extendable support for mitre cross-cut table
You obtain an additional standard cross-cut table for your machine with this option. A roller support is required for use as a supplementary table and for machines without a tilting arm.
Additional standard cross-cut table 1,340 x 650 mm
If you work with cutting lengths > 3.7 m, you generally have to support the cross-cut table directly on the floor with a roller support instead of using the support arm. The roller support is also required if an additional cross-cut table is to be used on the machine, e.g. for processing large heavy boards. Several cross-cut tables with roller support can also be combined on one machine for processing large, heavy materials. The roller support cannot be combined with the mitre cross-cut table.  
Additional roller support for standard cross-cut table
Cross-cut fence
The dimension display on this cross-cut fence with 2-point alignment is provided in analogue form, i.e. using a scale. In contrast to the version with full-length support, the workpiece rests on two points in this fence. Only in this way can slightly concave first cuts, perhaps caused by stresses in the board, also be precisely cut at an angle. Cutting lengths of 190 - 2020 mm can be set quickly and extremely accurately thanks to the scale, which can be easily read with the magnifier, and the standard fine adjustment for the inner stop element. The quick clamp enables you to change the ball-raced stop element quickly from dimension to dimension and cut lengths up to 3310 mm with the extendable outboard stop. If you prefer to work with digital exact dimensions, the digital cross-cut fence is the right option: The inner and outer stop work with separate measuring devices and can therefore be set independently with an accuracy of a tenth of a millimetre. Each display can be changed over to display relative dimensions, in order to execute incremental cuts quickly, for example.
Analogue cross-cut fence with 2-point alignment
The dimension display on this cross-cut fence with 2-point alignment is provided digitally, i.e. using electronic displays. In contrast to the version with full-length support, the workpiece rests on two points in this fence. Only in this way can slightly concave first cuts, perhaps caused by stresses in the board, also be precisely cut at an angle. Cutting lengths of 190 - 2020 mm can be set quickly and extremely accurately thanks to the clearly legible digital displays and the standard fine adjustment for the inner stop element. The quick clamp enables you to change the ball-raced stop element quickly from dimension to dimension and cut lengths up to 3310 mm with the extendable outboard stop. The digital cross-cut fence is always the right option: The inner and outer stop work with separate measuring devices and can therefore be set independently with an accuracy of a tenth of a millimetre. Each display can be changed over to display relative dimensions, in order to execute incremental cuts quickly, for example.
Digital cross-cut fence with 2-point alignment
The dimension display on this cross-cut fence with full-length support is provided in analogue form, i.e. using a scale. In contrast to the 2-point version, this model has large flip stops and the full length of the workpiece rests on the fence. For example, this is ideal if you work a lot with thin flexible material. The wood to be cut is straightened by the fence and can therefore be cut accurately to size. As in the case of a 2-point alignment, the inner stop element with fine adjustment and scale magnifier can be precisely adjusted. The quick clamp of the stop element supports quick dimension change between 205 and 2020 mm, whereas lengths up to 3310 mm can be set with the extendable outboard stop. If you prefer to work with digital exact dimensions, the digital cross-cut fence is the right option: The inner and outer stop work with separate measuring devices and can therefore be set independently with an accuracy of a tenth of a millimetre. Each display can be changed over to display relative dimensions, in order to execute incremental cuts quickly, for example.
Analogue cross-cut fence with full-length support
The dimension display on this cross-cut fence with full-length support is provided digitally, i.e. using electronic displays. In contrast to the 2-point version, this model has large flip stops and the full length of the workpiece rests on the fence. For example, this is ideal if you work a lot with thin flexible material. The wood to be cut is straightened by the fence and can therefore be cut accurately to size. In conjunction with the quick clamp of the stop element, the clearly legible digital displays and the standard fine adjustment for the inner stop element support quick dimension change between 205 and 2020 mm, whereas lengths up to 3310 mm can be set with the extendable outboard stop. The digital cross-cut fence is always the right option: The inner and outer stop work with separate measuring devices and can therefore be set independently with an accuracy of a tenth of a millimetre. Each display can be changed over to display relative dimensions, in order to execute incremental cuts quickly, for example.
Digital cross-cut fence with full-length support
Not available for standard cross-cut fences of the T60A, T60C and T65
Additional analogue 2-point stop element
Not available for standard cross-cut fences of the T60A, T60C and T65
Additional digital 2-point stop element
Not available for standard cross-cut fences of the T60A, T60C and T65
Additional analogue 2-point stop element
Not available for standard cross-cut fences of the T60A, T60C and T65
Additional digital 2-point stop element
Not available for standard cross-cut fences of the T60A, T60C and T65
Additional analogue flip stop element
Not available for the standard cross-cut fence of the T60A, T60C and T65
Additional digital folding stop element
Not available for standard cross-cut fences of the T60A, T60C and T65
Additional analogue flip stop element
Not available for the standard cross-cut fence of the T60A, T60C and T65
Additional digital folding stop element
Angle cutting system
The innovative ”RadioCompens” mitre cut system provides fully automatic length compensation for mitre cuts and double mitre cuts by means of a wireless connection between the mitre cross-cut table, controller and digital display of the cross-cut fence. Thanks to this wireless-supported communication of the cross-cut table, controller and stop elements, time-consuming setup times for mitre cuts are reduced by up to 80 %. You simply set the table to the desired angle and the electronic cutting length displays on the cross-cut fence immediately show you the corrected length dimension. In contrast to other systems in the market, "RadioCompens" compensates for a variety of saw blade thicknesses by itself fully automatically. As a result, you always have a precision cut with an accuracy of a tenth of a millimetre also on the left-hand side of the saw blade - irrespective of the saw blade you are currently using. The system consists of:
    digitalem Längenanschlag
  • Parallelogrammquertisch mit Funkanbindung "RadioConnect" an die Steuerung
  • RadioCompens-Elektronik
  • ParaGlider zur einfachen Reduzierung des Abstandes zwischen Längenanschlag und Sägeblatt
”RadioCompens” mitre cut system with 2-point alignment
The innovative ”RadioCompens” mitre cut system provides fully automatic length compensation for mitre cuts and double mitre cuts by means of a wireless connection between the mitre cross-cut table, controller and digital display of the cross-cut fence. Thanks to this wireless-supported communication of the cross-cut table, controller and stop elements, time-consuming setup times for mitre cuts are reduced by up to 80 %. You simply set the table to the desired angle and the electronic cutting length displays on the cross-cut fence immediately show you the corrected length dimension. In contrast to other systems in the market, "RadioCompens" compensates for a variety of saw blade thicknesses by itself fully automatically. As a result, you always have a precision cut with an accuracy of a tenth of a millimetre also on the left-hand side of the saw blade - irrespective of the saw blade you are currently using. The system consists of:
    digitalem Längenanschlag
  • Parallelogrammquertisch mit Funkanbindung "RadioConnect" an die Steuerung
  • RadioCompens-Elektronik
  • ParaGlider zur einfachen Reduzierung des Abstandes zwischen Längenanschlag und Sägeblatt
”RadioCompens” mitre cut system with full-length support
Additional "RadioCompens" 2-point stop element
Not available for standard cross-cut fences of the T60A, T60C and T65
Additional analogue 2-point stop element
Not available for standard cross-cut fences of the T60A, T60C and T65
Additional digital 2-point stop element
Additional "RadioCompens" folding stop element
Not available for standard cross-cut fences of the T60A, T60C and T65
Additional analogue flip stop element
Not available for the standard cross-cut fence of the T60A, T60C and T65
Additional digital folding stop element
Mitre fence
The analogue fence is characterised by a high setting precision thanks to a large angle scale; the mitres can be cut from both sides. Apart from a precise mitre cut, an exact length on the workpiece is also required in most application cases. A length compensation was therefore provided for ten preferred angles (0°, 5°, 10°, 15°, 22,5°, 30°, 45°, 50°, 60° and 67.5°). The fences can be used on alternating sides and permit cutting lengths from 90 – 1,375 mm. An excellent feature of the MitreX is the utility model-protected tear-out prevention block, which guarantees tear-free cuts. It is also just as useful for cutting after marking out. The one-handed clamping means that attachment to the sliding table is simplicity itself. The fence is very stable but nevertheless lightweight and is supplied with a wall bracket.
Analogue MitreX double mitre fence
The digital fence is characterised by a high setting precision thanks to a large angle scale and the additional digital angle display (resolution 0.01°). Mitres can be cut from two sides. Apart from a precise mitre cut, an exact length on the workpiece is also required in most application cases. A length compensation was therefore provided for ten preferred angles (0°, 5°, 10°, 15°, 22,5°, 30°, 45°, 50°, 60° and 67.5°). The fences can be used on alternating sides and permit cutting lengths from 90 – 1,375 mm. An excellent feature of the MitreX is the utility model-protected tear-out prevention block, which guarantees tear-free cuts. It is also just as useful for cutting after marking out. The one-handed clamping means that attachment to the sliding table is simplicity itself. The fence is very stable but nevertheless lightweight and is supplied with a wall bracket.
Digital MitreX double mitre fence
Support extension
The extension of the table length is executed as a tool and equipment case. You therefore always have tools and smaller accessories readily available directly by the machine.
Toolbox as an extension of the table length
The extension of the table length elongates the machine table to the rear by 1,200 mm with a width of 850 mm. It is supplied instead of the tool tray. It is executed in stainless steel on a steel frame.  
Extension of the table length, rear
The table surface is approx. 600 x 350 mm and foldable. The accessory is not available for a sliding table length of 1.9 m.
Front support table, foldable
The "second support" is very useful for processing large boards and serves as a support when working with the mitre fence. The accessory can be used as a simple parallel cutting aid when combined with the "rip fence for sliding table".
Second support
The rip fence is simply attached to the "second support". The accessory permits parallel cuts of up to 800 mm on the sliding table. The "second support" is a prerequisite.
Rip fence for “second support”
Clamping device
Installation is provided in the sliding table groove at any position of the sliding table. Max. clamp height 150 mm, clamp stroke 10 mm.
Manual eccentric clamp
Installation is provided in the sliding table groove at any position of the sliding table. The clamp has a pneumatic safety cylinder, the cylinder stroke is 0 - 100 mm.
Pneumatic clamp with remote control unit
MARTIN offers an ingenious pressure bar for the sliding table, in order to extend the functional capabilities of your sliding table saw. It is easy to cut thin boards, Resopal laminate or veneer with this. With a stroke height of 100 mm and a contact pressure of 800 N, large workpieces can also be processed safely and precisely. The pressure bar can also be used with a cross-cut fence for exact workpiece positioning. This can be positioned at the end or beginning of the bar and between the pressure elements. Angle cuts are also possible. In this regard, the "interfering" pressure segments are simply switched off and therefore remain in the top position. The pressure bar is provided with a continuous control panel for quick and intuitive operation. This enables operation from any position on the sliding table. The commissioning of the pressure bar is simplicity itself. It is mounted directly on the sliding table at two points, screwed together with this and connected to the compressed air line of the machine – finished. Max. cutting length with cross-cut fence in front or rear position: 1,590 mm, 1 actuated clamping element @ 1,095 mm, max. workpiece length without cross-cut fence: Length of sliding table minus 160 mm.
Pneumatic pressure bar 1.9 m
MARTIN offers an ingenious pressure bar for the sliding table, in order to extend the functional capabilities of your sliding table saw. It is easy to cut thin boards, Resopal laminate or veneer with this. With a stroke height of 100 mm and a contact pressure of 800 N, large workpieces can also be processed safely and precisely. The pressure bar can also be used with a cross-cut fence for exact workpiece positioning. This can be positioned at the end or beginning of the bar and between the pressure elements. The pressure bar is provided with a continuous control panel for quick and intuitive operation. This enables operation from any position on the sliding table. The commissioning of the pressure bar is simplicity itself. It is mounted directly on the sliding table at two points, screwed together with this and connected to the compressed air line of the machine – finished. Max. cutting length with cross-cut fence in front or rear position: 2,690 mm, 2 jointly actuated clamping elements @ 1,095 mm, max. workpiece length without cross-cut fence: Length of sliding table minus 160 mm.
Pneumatic pressure bar 3.0 m
MARTIN offers an ingenious pressure bar for the sliding table, in order to extend the functional capabilities of your sliding table saw. It is easy to cut thin boards, Resopal laminate or veneer with this. With a stroke height of 100 mm and a contact pressure of 800 N, large workpieces can also be processed safely and precisely. The pressure bar can also be used with a cross-cut fence for exact workpiece positioning. This can be positioned at the end or beginning of the bar and between the pressure elements. The pressure bar is provided with a continuous control panel for quick and intuitive operation. This enables operation from any position on the sliding table. The commissioning of the pressure bar is simplicity itself. It is mounted directly on the sliding table at two points, screwed together with this and connected to the compressed air line of the machine – finished. Max. cutting length with cross-cut fence in front or rear position: 2,990 mm, 2 jointly actuated clamping elements @ 1,250 mm, max. workpiece length without cross-cut fence: Length of sliding table minus 160 mm.
Pneumatic pressure bar 3.3 m
MARTIN offers an ingenious pressure bar for the sliding table, in order to extend the functional capabilities of your sliding table saw. It is easy to cut thin boards, Resopal laminate or veneer with this. With a stroke height of 100 mm and a contact pressure of 800 N, large workpieces can also be processed safely and precisely. The pressure bar can also be used with a cross-cut fence for exact workpiece positioning. This can be positioned at the end or beginning of the bar and between the pressure elements. The pressure bar is provided with a continuous control panel for quick and intuitive operation. This enables operation from any position on the sliding table. The commissioning of the pressure bar is simplicity itself. It is mounted directly on the sliding table at two points, screwed together with this and connected to the compressed air line of the machine – finished. Max. cutting length with cross-cut fence in front or rear position: 3,390 mm, 3 actuated clamping elements, 2 of which can be independently disconnected @ 908 mm, max. workpiece length without cross-cut fence: Length of sliding table minus 160 mm.
Pneumatic pressure bar 3.7 m
The clamping and sawing system for sliding table saws is designed for the ergonomic, safe and efficient cutting of workpieces. The new system is an effective guard which can be installed and adjusted in no time without the need for tools. When sawing oblique, short, narrow and wedge-shaped workpieces of different sizes, the health and safety regulations are often disregarded based on the assumption that it is quicker that way. The new guard for sliding table saws puts an end to the excuses as it makes the safe option impressively quick without the need for tools or any significant loss of time. The clamping and sawing system is available in a standard and a comfort version. A storage board for wall mounting which is suitable for both versions ensures that each individual component of this workplace protection device is always in the right place and quickly to hand. The set consists of:
    1 Zuführanschlag
  • 1 Hilfsanschlag schräg
  • 1 Schwenkspanner
  • Wandmontageplatte
Clamping and sawing system, “Standard”
The clamping and sawing system for sliding table saws is designed for the ergonomic, safe and efficient cutting of workpieces. The new system is an effective guard which can be installed and adjusted in no time without the need for tools. When sawing oblique, short, narrow and wedge-shaped workpieces of different sizes, the health and safety regulations are often disregarded based on the assumption that it is quicker that way. The new guard for sliding table saws puts an end to the excuses as it makes the safe option impressively quick without the need for tools or any significant loss of time. The clamping and sawing system is available in a standard and a comfort version. A storage board for wall mounting which is suitable for both versions ensures that each individual component of this workplace protection device is always in the right place and quickly to hand. The set consists of:
    1 Zuführanschlag
  • 1 Hilfsanschlag schräg
  • 2 Hilfsanschlägen schmal
  • 2 Schwenkspannern
  • Wandmontageplatte
Clamping and sawing system, “Comfort”
Additional accessories
The laser beam shows you the exact progression of the cut, which is especially useful for trimming and cutting solid wood. Cutting steps to size after marking out is also one of the typical areas of application of this accessory.
Laser kerf display
The spiral cable enables the switch to be positioned anywhere on the sliding table. The switch can be placed on the right behind the guide beam for storage.
On/off switch for main saw and scoring saw unit
This option is ideal for cutting plastics and non-ferrous metals. The sprayer radially covers the saw blade with special minimum quantity coolant media (not supplied).
Minimum quantity cooling lubrication device for main saw blade
Miscellaneous
Not until you have a mastered machine to perfection can you exploit its maximum potential. Thorough on-site training by a MARTIN factory technician enables you to fully benefit from your machine.
On-site training / Commissioning
We offer tailored inspection and maintenance services for your MARTIN machines. You thereby maintain the operational readiness and accuracy of your machine over many years.
Inspection / maintenance by factory technician on site as per Martin maintenance schedule
For the use of the Configurator, please turn your device by 90 °.
We will send you a non-binding offer
T75 PreX
Fields marked with * must be completed. We will, of course, treat your data as confidential.