Unique: 1.5 mm planing height
Download
For configuring your individual machine you need the brochure as well as the corresponding options book.
Thinest workpieces perfectly planed thanks to vacuum technology
Special cutter blocks for plastic processing
Heavy, vibration-absorbing machine frame
Four solid support spindles combined with two prism guides
Electronic control with 0.05 mm positioning accuracy
Experience the T45 live!
Electronic control
The standard, clearly arranged controller of the T45 accelerates operation of the machine, i.e. it saves time and minimises operating errors. The target dimension is input in “whole” dimensions, a decimal place only has to be input if it is needed. This also saves time and minimises operating errors. The electronics offer storage capacity for 99 planing dimensions, any desired definable incremental dimension can be assigned under program “0”. The planing dimensions increase the comfort, the incremental dimension facilitates the removal of larger amounts. A new dimension does not have to be specified each time.
TERSA cutter block 25°
The TERSA solid steel cutter block with 25° is specially designed for processing plastic. The block is less aggressive as a result of the blunter blades, thinner plastics are also perfectly planed. Blades can be changed in less than a minute thanks to the form-locked knife holders. TERSA reversible blades are available in four different qualities, i.e. the perfect blade for each task. Furthermore, blades with a negative cutting angle are available, which provide excellent results, especially with thin and very thin workpieces. The standard Z4 block can be operated as a Z2 cutter block by using two dummy blades.
T45 Contour
The planer becomes a profiling machine. The T45 Contour offers globally unique solutions for the safe planing and profiling of surfaces in one pass. Standard, corrugated back blades can be quickly and easily inserted in the profile blade slots. The blades are inserted radially. The blade setting gauge supplied as standard considerably reduces the set-up times. Profiles can be planed quickly, easily and with repeated accuracy up to 630 mm wide and 25 mm deep. The T45 Contour opens up an unimagined variety of new products and possibilities.
Xplane
The new 3-row Xplane cutter block from MARTIN impresses even when idling with remarkably smooth running. This impression is reinforced as soon as the block is engaged, as the block operates extremely quietly. Even the biggest depths of cut require a surprisingly low motor rating – another advantage. However, the surface quality which can be achieved with the Xplane is really breathtaking. The individual blades cut shavings the size of a fingernail which can be transported away without any problems. The dreaded “spaghetti shavings” are therefore a thing of the past.
-
- • Premium surface quality thanks to improved 3-row construction
-
- • Reduction of tear-outs due to shear cuts and MARTIN XS (eXtra Sharp) knives
-
- • Increases safety standards by reducing the perceived noise exposure by almost 50%
-
- • Reduces costs due to 20 times higher durability and four cutting edges of the carbide cutters
-
- • Reduction of manual force and premium surface quality thanks to XS cut of the knives
-
- • Lowered chip volume (chips are broken up) and increased chip flow thanks to the unique tool geometry
Composite frame
The machine frame of the T45 is a sturdy and thick-walled composite structure whose design can only be found with this degree of technical perfection in MARTIN machines. Otto Martin invented this method of construction in the 1920s and had it registered as a design patent back then. Today, after more than 90 years of continual improvement, MARTIN still uses this simple and effective principle of frame construction. The intelligent combination of steel and concrete creates a high quality machine frame which is unparalleled when it comes to stability, absorbing capacity and torsion resistance. The vibrations which occur in any planer are absorbed many times more effectively than in cast-iron or even welded frames. This frame is the perfect basis for perfect work!
Table guide
Four sturdy supporting spindles installed in the 12 cm thick frame support the thicknessing table, so that it is secure against tilting, and absorb the pressure forces exerted from above. Two sturdy two-dimensional prismatic guides divert the arising shear forces.
Controls and Features
Thicknessing table extension
Irrespective of whether short or long workpieces are planed, the sturdy thicknessing table extension usually dispenses with the need for a second person behind the machine. Short workpieces do not fall on the floor and long pieces are supported at the out-feed side. The table extension always moves synchronously with the thicknessing table and the accessory can be retrofitted without any problems. Choose between the long version with 1,200 mm or the short, foldable version with 450 mm. The short version can also be mounted on the infeed side.
Vacuum technology
Thanks to our vacuum technology, you can process plastics down to 2.8 mm, with the option “1.5 mm” even down to a residual thickness of 1.5 mm, absolutely process-safe. In addition to the special vacuum table, the vacuum blower is also an indispensable accessory for anyone who wants to work with thin and thinest workpieces.
Foldable table extension
Irrespective of whether short or long workpieces are planed, the sturdy thicknessing table extension usually dispenses with the need for a second person behind the machine. Short workpieces do not fall on the floor and long pieces are supported at the out-feed side. The table extension always moves synchronously with the thicknessing table and the accessory can be retrofitted without any problems.
Choose between the short, foldable version with 450 mm or the long version with 1,200 mm. The short version shown in the photo can also be mounted on the infeed side.
Choose between the short, foldable version with 450 mm or the long version with 1,200 mm. The short version shown in the photo can also be mounted on the infeed side.
1.5 mm planing thickness
With this option, we offer you the possibility of reducing plastics down to a thickness of 1.5 mm through machining. Workpieces with a residual thickness of 1.5 mm can be perfectly manufactured through respective adjustments to transport and pressure equipment as well as the kickback arrestors. A residual thickness of 1.5 mm corresponds to the thickness of a five Euro cent coin.
Second outfeed roller
The workpiece transport of problematic materials and short workpieces can be improved by means of a second rubber outfeed roller – especially if no lubricant can be used. The second outfeed roller is also available as a steel roller.
Infinitely variable feed
We offer two variants of the infinitely variable feed especially for processing plastic. Variant 2, 12 m/min, provides a good compromise. We also offer the slower variant, 1 – 6 m/min, for special cases.
Vacuum table
With its ground surface and its two vacuum table holddowns, this table offers ideal conditions for the impact-free planing of thin and the thinnest materials. The vacuum applied in the vicinity of the cutter block prevents thin workpieces from lifting into the cutter block. The two table holddowns are connected to an external vacuum blower. We recommend this option to any plastics processor.
Steel segmented infeed roller
The steel segmented infeed roller is an indispensable aid if the greatest importance is attached to maximum traction. Differences in thickness of up to 2 mm are compensated for on the infeed side without any problems. There is practically no wear. However, this infeed system is less suitable for fine planing.
Extraction nozzle
The standard extraction nozzle of the T45 provides perfect clearance of the shavings. You simply decide whether to connect the machine on the left or right of your extraction system on site, the conversion only takes a few minutes.
Configure your individual T45